Introducing Electric Welding Machine
Description of the piece and the performance of the welding machine:
- The handle is for carrying the welding case.
- Welding machine display screen to display the boiling current exhaust.
- The power switch of this LED turns on when the three-phase inverter is overheated.
- Welding power button to adjust the output current.
- Articule button for adjusting arc flow.
- The piece is related to the positive output of the electric welding machine to connect to the workpiece.
- The negative output of the wiring electrode is the electrode.
How to operate the electric welding machine:
- Provide fittings for connecting pliers.
- Unlock the bolts on the connecting nipple that connects the cable.
- Attach the connection to the connecting cable head, tighten it with a clamping ring.
- Connect the connecting cable to the connector plier and close it firmly.
- The plug is now ready to connect to the workpiece or welding station.
- Prepare the electrodegger knife and cable assembly and related fittings.
- Attach and secure the electrode plunger cable using the connector connectors to the electrode plunger.
- Electrodes and plug nipples are ready to connect to the welding machine.
- Connect the electrode jacks and connecting cable to the positive and negative poles of the welding machine.
- To start the welder, check out the following points:
- 1) Note that this machine has a ground connection.
- 2) Cable and three branches of any good health.
- 3) The main startup key should be in silent mode
- Connect the three wires of the welding machine to the three-phase power supply.
- Put the inverter's switch on the switch.
- Depending on the type and diameter of the electrode, select the appropriate welding current intensity.
- A set of welding and connecting tongs and a ready-to-use electrodes.
- Connect the binding tool to the work desk or workpiece.
- Place the electrode in the electrode screw hole.
- After controlling the safety issues, you can set up the arc.
To turn off the inverter welding machine, consider the following:
- 1) Turn off the original key.
- 2) For more safety, remove the three branches.
- 3) Place the cable and the three plugs in the right place near the device.
- 4) Assemble the nipple cables and put them in place.
- 5) At the end of the work, collect the tools and equipment and bring them to the desk warehouse.
Observing the following points when using an electric welding machine is required:
- Beware of any kind of oil and dust. This will increase the life of the device.
- Make sure the power is correct.
- Be sure to use safety equipment.
- Oxygen cylinders should not be exposed to open flames such as welding or cutting torches, electric arc, molten lava, spark, radiators and sun rays.
- The body of electrical welding devices should have an effective electrical connection to the ground.
- The electrode clips must be fitted with protective plates or shields to protect the worker against the heat generated by the arc.
Maintenance of the inverter device:
- To prolong the life of the welding machine after each use and use again, clean the welding machine and do not free any oil and dust.
- This welding machine service is sure to be done by authorized service
Read moreShow less