Read moreShow less
Introducing metal pipe bending machine
Various parts of the manual bending tube:
- Jaw (replaceable)
- Jaw changer
- Jaw (replaceable)
How to work with a hydraulic bending machine:
- First, we attach the appropriate jaws and the size of the tube to the bending tube.
- Place the tube between two jaws.
- By turning the handle, bends the pipe.
- To lengthen the life of the bending machine, clean the appliance after each use and avoid any oil and dust.
- The service of the machine must be carried out by a work service.
Observing the following in the work environment and the individual environment when using metal pipe bending is required:
- Keep the environment clean and free of any oil or dust.
- The presence of any abnormalities in the environment will cause problems
- This is an electric insulating device. Please be careful when using.
- Do not use pipe clamps when you are sleepy.
- Use safety clothing.
- Do not use this tool in the event of a malfunction or fracture.
- Make sure that the machine is working properly.
Additional information about metal pipe equipment:
- The steel factory has a steel pipe clamp and a metal pipe clamp.
- The bending tube is used for steel pipes, steel pipes, stainless steel pipes, welded pipes and circular steel pipes.
- Hydraulic bender with bending ability of metal pipes from 1/2 to 2 inches in size manually at various angles up to 90 degrees.
- The Holliday Rustgar test has the ability to insulate pipes and metal fittings.
- The metal strip strip is capable of pulling insulating tubes from 2 to 56 inches.
- Re-checking cameras have access to piping systems, problems in the cavity wall, problems in water tanks, ducts and air conditioning systems.
Learn more about the products of the industry.
- Manual hydraulic pans are able to punch all kinds of metal sheets.
- Open flange to open or collapse flanges.
- Green iron washer for pipe welding and polypropylene fittings or green and white pipes.
- Polypropylene tubes can be cut with a green tube scissor, or a scissors cutter.
- The butter welding of the polyethylene welding machine should not be used in rainy weather, snowy, intense winds and extreme cold.
- Pe pipe is used to cut polyethylene and propylene pipes from a size of 50 to 127 mm.
- Pe Rustgar Fittings Wrench has the ability to open and close various types of polyethylene fittings and PVC fittings.
- All pex flush pipe presses can be pressed with all five-layer connections (NewPipe, UnixPipe, Isopaype, SuperPip, etc.).
- Polyethylene Rastegar Fittings Wrench has the ability to open and close various types of polyethylene fittings and PVC fittings.
- All five-layer flush pipe presses can be pressed with all pex connections (NewPipe, UnixPipe, Isopaype, SuperPip, etc.).
- You can contact the sales department of Rastgarstalat Company to receive the price list for pex pipe presses
- pex presses: Five-layer tube presses,pex pipe hydraulic presses, pex pipe-loaded presses, pex pipe presses.
- This pex electric tube is used to calibrate (size) all kinds of pex pipes.
- pex bending spring bends are used to bend all kinds of pex pipes in sizes 16-20-25-32
- The pex flexible pipe bender has the ability to bend PVC pipe types,pex pipes, copper and aluminum
- The pex pipes can be riveted with pex pipe pen, and pex pipe openers can be used to open five-layer pipes.
- The industry's plumbing testing equipment is available in two models of hand pump test and electric pump test device.
- Electrofusion welding machine is used for pipe welding and polyethylene fittings.
- Painter tools are used to cut, hold, and punch all kinds of pipes and fittings.
- Metal pipes consist of tubes, electric teeth, honey beetles and stock Rex.
- Welding industry inverter is used for welding all kinds of iron, galvanized steel, steel and cast iron.
- Welding machine including Welding rastegar Industrial Welding Machine is a welding screwdriver.
- The gas leak detection device and the leak detector of the resilient water industry have the ability to leak any type of pressure pipe up to a depth of 30 meters in analog form.
- Tubular opening tubes.
- Cable cutters on handhelds include large cable cutters , cable cutter on average, cable cutter on small handles.
- Cable cutters are used to cut all kinds of copper and aluminum cables.
- Cable cutterss are used for hydraulic cutting of copper, aluminum and copper cables.
- The cable cutterss have the ability to press copper and aluminum cables.
- The hydraulic cable press also features a variety of copper and aluminum cables.
- The riveting nut is used to riveting various types of rivets
manual tube bender
- Bend the metal pipe, steel pipe, stainless steel pipe, wire pipe, circle steel pipe
- Maximum rotation of bend: (180 degree)
- Bend the pipe without any damage
- Material: steel
- Maximum pressure:(16tons)
- Weight: (25kg)
- resistant plastic box
- Function: very fast