Home
>
Hydraulic tools
>
Hydraulic Pullers
>
ENERPAC Hydraulic Puller 100 tons EPH1003

ENERPAC Hydraulic Puller 100 tons EPH1003

Brand:

Hydraulic Puller

Information:

To dismount bearings in industrial activities
Withdrawal force: 100 tons
Suitable for heavy work
Steel jaws
Catching range: 190-1778 mm
Hydraulic and manual pump
Maximum working pressure: 700 bar
Ability to connect to hydraulic pumps up to 700 bar pressure
Made in USA
If repairing of the puller is needed call repairing department of Rastegar Sanat
For more information about the price of the puller call selling department of Rastegar Sanat

Types of hydraulic pullers

Pullers are used to dismount all kinds of industrial pulleys. There are different kinds of pullers such as manual puller, Hydraulic puller and pump pullers. Also, there are simple, two-legged, three-legged, etc. pullers available in the market.

The price of hydraulic puller

The price of the hydraulic puller has a different range depending on the type, brand and model.

Self-pump hydraulic puller
This type of puller's difference from other pullers is that its pump is connected to the machine.

Separate pump hydraulic puller
The pump of this puller is connected to the device separately through a wire.

Buying a hydraulic puller

To buy a hydraulic puller, you must first specify the model you want and then specify its type (separate pump hydraulic puller, self-pump hydraulic puller) and buy a device that has high quality construction. Among the best hydraulic cash brands, the following can be mentioned:

RSCO self pump hydraulic puller, RSCO separate pump hydraulic puller, Force hydraulic puller, Enrpak hydraulic puller

How to buy a hydraulic puller
It is possible to buy a hydraulic puller in Rastegar Sanat in several ways. The first and easiest way is to buy directly through the site. The second method is to contact the Rastegar Sanat company and receive free guide and order by phone. The third method is to go to the Rastegar Sanat sales representatives all over the country and buy in person.
Repair of hydraulic puller
At first, try to avoid striking or hitting sharp objects, metal, etc., on the legs of the puller. Also, avoid shaking the hydraulic puller handle and hydraulic puller as much as possible. However, if there is any problem with your hydraulic puller, you can refer to Rastegar Sanat repair department and hand over your machine to our experienced experts.

How to work with a hydraulic puller
First, set the puller's legs to the desired shaft mount size.
Unscrews the retaining connector, then adjust the legs to the desired size.
Attach the hydraulic puller's legs to the part that you want to release.
Pump with the handle (this is for the pullers that are self pump)
If the puller is a separate pump, connect the hose to the pullers connector.
Then move the handle (make sure the correct connection between the hose and the puller)
After moving the handle, the pullers shaft will move forward.
The shaft starts to press the part where the piece is stuck and finally releases the piece.

Construction of hydraulic puller
The following components are used in the construction of the hydraulic puller:
Pump head (360 degree rotation)