Home
>
Garage Tools
>
Transmission Jack

RSCo PEX pipe manual press MP-W32

$99.00

Explanations:

This press machine has been developed with the hard efforts of innovators and engineers of this company with the best technology in the world, using a variety of CNC and NC machines and hot Forging method (with the highest alloy steels). This company has produced this valuable product under its brand for the first time, which makes the product another honor for the company.

RSCo PEX pipe manual press

Information:

Ability to press all types of pipes and 5 layered attachments (superpipe, new pipe, unique pipe).
Steel jaws in 4 sizes: 16, 20, 25, 32.
Sealing warranty till 16th pressure.
Metallic strongbox.
Guide book with Hex wrench screws.
This press contains ISO 9001 and CE standards.
RSCo 1 year warranty.

RSCO PPR welding machine model RPW0

$48.33

PPR pipe welding machine

Information:

It has the capability of welding all kinds of PPR pipes and connections.
welding size : 1/2"-2" , 20 - 63 mm
2 High-pressure elements, power rate 2500 W
Light metal body with a temperature rate of 300 C
Input and output wires are fireproof
The main thermostat is 50 to 300 degrees Celsius
Ability to stand on both sides
Ability to warm fast, less than 1 min.
Body color: electrostatic furnace
One-year warranty , and five years after sales service
Please contact us for more information

RSCO Inverter Welding Machine RSG220

$141.12

RSCO Welding Inverter

Information:

To weld all kinds of iron galvanized, steel, carbon steel, cast iron, and etc.
Working current: 20-220 amp
6 automatic charging capacitors
IGBT technology
Input power swing system
Industrial fireproof high-pressure input power cable
Voltage increasing in high frequency and low welding spraying technology, significant welding arc, and easy usability
Weldable electrodes' sizes: 2, 2.5, 3.2, 4 mm permanently and 5 mm cross-sectionally
Suitable size, lightweight, low power consumption
High-pressure sensor
Ability to weld penetrating electrodes cross-sectionally
Automatic arc adjustment system
3 separate electronic boards
Toshiba Japan IC
Voltage: AC220V ±20%
Frequency: 50-60 Hz
Power factor: 0.73
No-load voltage: 60 V
Input power: 7.3 kW
Weight: 7.43 kg
Weldable electrodes: all types of steel electrodes, iron electrodes, cast iron electrodes
Automatic electrode adhesion system
Miniature fuse to control the input power
Can be used in high temperatures and tropical regions
Accessories: refractory torch and cable, refractory ground cable and clamp, mask, combination wire brush
ISO, SGS and, CE standards
30-months warranty and 5-years after-sale services
Contact us for more information

RSCO Nail Gun model NG3L

$80.10

RSCO Nail Gun

Information :

Can be used for iron, steel, Girder, iron sheet, concrete, wood, plastic, rubber (pvc), Kenaf roof, metal sheets, steel, cast iron, etc.
Suitable for heavy and industrial work with excellent power.
With automatic silencer
power : 350 to 450 joule
Light weight : 750 g and portable
Minimum number of shots : 100
Maximum number of shots in row : 500
With the ability to adjust 3 levels of firepower
Firing degree in low mode : The size of the nail is 25-32 mm for drilling iron plates with a thickness of 6-8 mm and C25, C30 concrete.
Firing degree in medium mode : The size of the nail is 37-42 mm for drilling iron plates with a thickness of 10-12 mm and C25, C30 concrete.
Firing degree in high mode : The size of the nail is 47-52 mm for drilling iron plates with a thickness of 10-12 mm and C25, C30 concrete.
It has an ergonomic handle with anti-sweat and anti-slip plastic coating
It has a very high speed in doing work
Very safe with long life
Ease of opening and closing the gun for service, cleaning and...
Accessories : Cleaning and lubricating spray, resistant plastic box, brush, spare spring
6 months warranty of Rastegar Sanat company

air pneumatic grease pump,
air operated grease pump cheap

RSCo Pneumatic Grease Pump PGP45L

$266.40

Pneumatic Grease Pump

Information:

For lubrication of all types of bearings, all cars, industrial devices, etc.
Pneumatic operating system
Tank capacity: 45 liters
Weight tolerance: 45 kg
Wheeled for easy transport
Maximum inlet pressure: 6-8 bar
Output pressure: 300-400 bar
Internal wind pressure: 6-8 bar (PSI 87-116) (If the pressure is lower, the device will not work and if it is higher, it will lock the device)
Output pressure: 1 to 60
Pumping rate: 0.85 liters per minute
High pressure rubber hose with dimensions 4M × 6mm × 16mm
Accessories: ring replacement kit, paper washer, spring, oil, valve, etc.
Dimensions: 400*400*830 mm
Unique and ergonomic design
Including travel pellet, head of grease pumps, high-pressure double-hose pressed and etc.
Weight: 17 kg
Contact us for more information

RSCO Digital PPR welding machine model RPWD6

$87.30

PPR pipe welding machine

Information:

It has the capability of welding PPR pipes.
welding size: 2 inch, PVC and PPR pipe 20-63 mm
6 Kalibr Die casting industrial Teflon size: 20-25-32-40-50-63 mm
Input voltage: 220-230 v
Power: 2500 w
Working temperature: 0 to 320 degrees with main thermostat
Internal and external wiring are fireproof
Light plastic body from polyamide fireproof.
Digital screen.
12 months warranty and 5 years sale service.
accessories: Guide catalog, base, meters, Allen wrench, PPR pipe cutter, gloves.
ISO 9001 & CE.

RSCO Manual Hydraulic Pump model PUH390-700

$248.40

RSCO Hydraulic Pump

Information:

To convert mechanical power supplied by internal combustion or by electric motors to hydraulic power
Maximum working pressure: 700 bar
Minimum output pressure: 20 bar
Tank capacity: 390 cc
Low pressure oil output: 4 cc
High pressure oil output: 1 cc
The handle has an antiperspirant and non-slip cover for easy operation
Dimensions: 155*105*400 mm
It has industry hose in length : 60 cm
It has valve for apply pressure
Weight: 4.6 kg
Made in China
Contact us for more information

Transmission Jack

فیلتر محصولات

مرتب سازی :

Out-of-Stock

Hydraulic Tall Transmission Jack

Hydraulic Tall Transmission Jack Information : Hydraulic Tall Transmission Jack is suitable for lifting up gear box and parts of cars . Maximum capacity : 300 kg . Length : 1930 mm . Equipped with big wheels for an...

Out-of-Stock

Hydraulic Tall Transmission Jack

Out-of-Stock

Hydraulic Transmission Jack

Hydraulic Tall Transmission Jack

$2,007.90

Hydraulic Tall Transmission Jack Information : Hydraulic Tall Transmission Jack is suitable for lifting up gear box and parts of cars . Maximum capacity : 1000 kg . Equipped with big wheels for an easy operation ....

Out-of-Stock

copy of Hydraulic Tall Transmission Jack

Showing 1-5 of 5 item(s)