RSCo PEX pipe manual press MP-W32

$99.00

Explanations:

This press machine has been developed with the hard efforts of innovators and engineers of this company with the best technology in the world, using a variety of CNC and NC machines and hot Forging method (with the highest alloy steels). This company has produced this valuable product under its brand for the first time, which makes the product another honor for the company.

RSCo PEX pipe manual press

Information:

Ability to press all types of pipes and 5 layered attachments (superpipe, new pipe, unique pipe).
Steel jaws in 4 sizes: 16, 20, 25, 32.
Sealing warranty till 16th pressure.
Metallic strongbox.
Guide book with Hex wrench screws.
This press contains ISO 9001 and CE standards.
RSCo 1 year warranty.

RSCO Inverter Welding Machine RSG220

$141.12

RSCO Welding Inverter

Information:

To weld all kinds of iron galvanized, steel, carbon steel, cast iron, and etc.
Working current: 20-220 amp
6 automatic charging capacitors
IGBT technology
Input power swing system
Industrial fireproof high-pressure input power cable
Voltage increasing in high frequency and low welding spraying technology, significant welding arc, and easy usability
Weldable electrodes' sizes: 2, 2.5, 3.2, 4 mm permanently and 5 mm cross-sectionally
Suitable size, lightweight, low power consumption
High-pressure sensor
Ability to weld penetrating electrodes cross-sectionally
Automatic arc adjustment system
3 separate electronic boards
Toshiba Japan IC
Voltage: AC220V ±20%
Frequency: 50-60 Hz
Power factor: 0.73
No-load voltage: 60 V
Input power: 7.3 kW
Weight: 7.43 kg
Weldable electrodes: all types of steel electrodes, iron electrodes, cast iron electrodes
Automatic electrode adhesion system
Miniature fuse to control the input power
Can be used in high temperatures and tropical regions
Accessories: refractory torch and cable, refractory ground cable and clamp, mask, combination wire brush
ISO, SGS and, CE standards
30-months warranty and 5-years after-sale services
Contact us for more information

air pneumatic grease pump,
air operated grease pump cheap

RSCo Pneumatic Grease Pump PGP45L

$266.40

Pneumatic Grease Pump

Information:

For lubrication of all types of bearings, all cars, industrial devices, etc.
Pneumatic operating system
Tank capacity: 45 liters
Weight tolerance: 45 kg
Wheeled for easy transport
Maximum inlet pressure: 6-8 bar
Output pressure: 300-400 bar
Internal wind pressure: 6-8 bar (PSI 87-116) (If the pressure is lower, the device will not work and if it is higher, it will lock the device)
Output pressure: 1 to 60
Pumping rate: 0.85 liters per minute
High pressure rubber hose with dimensions 4M × 6mm × 16mm
Accessories: ring replacement kit, paper washer, spring, oil, valve, etc.
Dimensions: 400*400*830 mm
Unique and ergonomic design
Including travel pellet, head of grease pumps, high-pressure double-hose pressed and etc.
Weight: 17 kg
Contact us for more information

RSCO Digital PPR welding machine model RPWD6

$87.30

PPR pipe welding machine

Information:

It has the capability of welding PPR pipes.
welding size: 2 inch, PVC and PPR pipe 20-63 mm
6 Kalibr Die casting industrial Teflon size: 20-25-32-40-50-63 mm
Input voltage: 220-230 v
Power: 2500 w
Working temperature: 0 to 320 degrees with main thermostat
Internal and external wiring are fireproof
Light plastic body from polyamide fireproof.
Digital screen.
12 months warranty and 5 years sale service.
accessories: Guide catalog, base, meters, Allen wrench, PPR pipe cutter, gloves.
ISO 9001 & CE.

RSCO water leak detector with high quality| on RSCO

RSCO water leak detector WLD20

$1,742.40

Informtion:

RSCo professional manual leakage finder:

Able to find digitally any leakage under pressure .
Including Digital LCD 7 inches HD Touch screen .
Includes voice amplifier with modulation voice controller for filtering up 10 levels
Ability to work on depth : 50 cm
Deletes different voice frequencies.
Able to find leakages even pointwise and limited in surroundings.
Includes sensitive and qualified headphones.
Working time : 15 H .
Multi-language menu
Working temperature : ( -20 ℃~ +50 ℃ )
Operation system : rechargeable
Charger : USB , 5v 2a
Aluminum box for easy portable
Frequency range of this leak detector : 10000 - 1.
Charging time : 7-8 h .
Equipped with Triangle sensor .
Weight : 8Kg .
Includes ISO9001 and CE from Eueope unioun.
For more info contact us via webpage.

RSCO manual PE pipe welding machine with the best quality

RSCO full hydraulic PE pipe welding machine HPD-250

$1,584.00

RSCO full hydraulic PE pipe welding machine

Information:

The ability to weld PE pipes and fittings of sizes: 90-250mm
Dynamic system : hydraulic
Equipped to strong steel base
Power source :220v 50 hertz
Power : 4.15 kilo watt
Manual or electric gearbox scraper 1.1 kilo watt with hardened steel blades
A 2.3 kilo watt electric heater with PTFE cover
Power hydraulic pump : 0.75 kilo watt
Pressure range : 0-6.3 mega pascal
Maximum heater temperature : 270 degrees
Working temperature : 170-250
Temperature deviation : +/- 5 degrees
Weight : 145 kg
Jaws made of die casting aluminum with electrostatic paint cover
Packed in wooden pallet for easy handling
Ability to display voltage input
Temperature system display and its accurate adjustment in digital form
Ability to display amperage output
Made of flat coupling with industrial cover for easy connection and increased lifespan
Internal jaws sizes: 90, 110, 125, 140 , 160 , 180 , 200 , 225 mm
All Rastegar Sanat HDPE pipe welding machines are made of 100% pure aluminum alloy
1-year warranty and 10-years after-sale services of RSCo
ISO 9001 and CE standards
For more info contact us via webpage

Home

فیلتر محصولات

مرتب سازی :

Out-of-Stock

HYUNDAI Cast iron Welding Electrode E Ni Fe

Cast iron Electrode Information: Used to generate electricity to perform welding steps Used for welding cast iron, construction steels, shipbuilding, boilers, tanks and thin sheets, machine building industries, metal...

Out-of-Stock

Gouging Electrode B506

Gouging Electrode Information: Used to generate electricity to perform welding steps Generate too much gas to remove the melt created by the arc Used to create U-shaped grooves for welded joints, remove cracks,...

Out-of-Stock

Welding Gauge

Welding Gauge Information: To control welded parts and joints in terms of dimensions, chamfered ramps in terms of surface angle of inclination and the necessary distances between parts for assembly To check whether...

Out-of-Stock

Broscope

Broscope Information: Used in technical inspection where access to it may require breakdown or be time consuming Used in a place where it is not possible to see the desired place with the naked eye Viewing angle: 240...

squeeze off tool, squeeze off tool types

RSCO Squeeze off Tool

$6.93

Squeeze off Tool Information: To hold the manometer on the welding capsule Made of high strength steel Manual operating system springy Unique and ergonomic design Made in Iran Contact us foe more information

gas cutting machine, gas cutting machine types

Out-of-Stock

Gas Cutting Machine

Torch Track Burner Gas Cutting Machine Information: Used in pipe diameter size and used for cutting with very high accuracy For cutting all types of steel, stainless steel, aluminum, copper and other metals Used in...

Gas Cutting Machine BOC

$406.44

Out-of-Stock

Leister Hot Air Hand Tool model 100.648

Leister Hot Air Hand Tool Information: For welding all kinds of plastic surfaces in grades of PVC, PP, PE, etc. Power: 460 w Source power: electricity Frequency: 50 / 60 Hz Voltage: 120 v Working temperature: 20-600...

Out-of-Stock

Leister Hot Air Hand Tool model 102.027

Hot Air Hand Tool Information: For welding all kinds of plastic surfaces in grades of PVC, PP, PE, etc. Power: 10000 w Source power: electricity Used in places where propane gas is dangerous Working temperature:...

Out-of-Stock

Leister Hot Air Hand Tool model 148.061

Leister Hot Air Hand Tool Information: For welding all kinds of plastic surfaces in grades of PVC, PP, PE, etc. Power: 2300 w Source power: electricity Working temperature: 65-620 C Voltage: 230 v Handle with...

extrusion welding machine,
plastic welder extruder

Out-of-Stock

Leister Analogue Extruder Welder model 119.200

Extruder Welder Information: For welding pipes and surfaces (PE, polyfluoride, PEX pipe, PVC) Power: 2800 w Source power: electricity Maximum working temperature: 300 C Voltage: 230 v Handle with antiperspirant and...

extrusion welder, extrusion welder price

Out-of-Stock

Leister Digital Extrusion Welder model 136.602

Leister Digital Extrusion Welder Information: For welding pipes and surfaces (PE, polyfluoride, PEX pipe, PVC) Power: 3000 w Source power: electricity Digital display Maximum working temperature: 350 C Voltage: 230...

extrusion welder,
plastic extrusion welder

Out-of-Stock

LEISTER Digital Extrusion Welding Machine model 136.602

Digital Extrusion Welding Machine Information: For welding pipes and surfaces (PE, polyfluoride, PEX pipe, PVC) Power: 3000 w Source power: electricity Digital display Maximum working temperature: 350 C Voltage: 230...

extrusion welder machine,
extruder welding machine

Out-of-Stock

Leister Extrusion Welder model 118.300

Leister Extrusion Welder Information: For welding pipes and surfaces (PE, polyfluoride, PEX pipe, PVC) Power: 3500 w Source power: electricity Digital display Maximum working temperature: 350 C Voltage: 230 v Handle...

plastic welder extruder,
extrusion welder machine

Out-of-Stock

METABO Extruder Welding Machine 1600 w

Extruder Welding Machine Information: For welding pipes and surfaces (PE, polyfluoride, PEX pipe, PVC) Power: 1600 w Source power: electricity Digital display Maximum working temperature: 380 C Voltage: 110 - 220 v...

wedge welding machine, wedge welding machine price

Out-of-Stock

LEISTER Geomembrane Wedge Welding Machine

Wedge Welding Machine Information: For welding all kinds of plastic surfaces in grades of PVC, PP, PE, etc. Suitable for welding edges and corners Power: 2800 w Source power: electricity Digital display Maximum...

wedge welding machine types,
wedge welding machine brands

Out-of-Stock

Geomembrane Wedge Welding Machine model 111.190

Wedge Welding Machine Information: For welding all kinds of plastic surfaces in grades of PVC, PP, PE, etc. Power: 2300 w Source power: electricity Voltage: 230 v Digital display Maximum working pressure: 100 - 1000...

Out-of-Stock

Rothenberger Extrusion Welder 1000 w

Extrusion Welder Information: For welding pipes and surfaces (PE, polyfluoride, PEX pipe, PVC) Power: 3.4 kW Welding thickness: 8 - 30 mm Welding pipe diameter: 3 and 4 mm Handle with antiperspirant and non-slip...

NOVO PRESS copper pipe expander 3.4inch |on RSCO

Out-of-Stock

NOVO PRESS copper pipe expander 3.4inch

Information: copper pipe expander: Expand the copper, aluminum, titanium, soft steel. Size: 3/4 inch . Manual system Suitable for refinery and hard work Steel rod High quality Made in GERMAN Resistant plastic box....

RSCO hydraulic pipe expander 10-42 mm

$176.40

RSCO pipe expander Specifications pipe expander is used for copper pipes , aluminum, Titanium , soft steel ,... Handle of the expander has plastic cover to prevent sweat and slipping . Working system : Manual...

Showing 1261-1280 of 11313 item(s)

RSCO Welding Inverter

Home

Subcategories

Menu

منو سایت

Search