Home
>
Hand and General Tools
>
Manual Puller and Bearing Separator

RSCo PEX pipe manual press MP-W32

$99.00

Explanations:

This press machine has been developed with the hard efforts of innovators and engineers of this company with the best technology in the world, using a variety of CNC and NC machines and hot Forging method (with the highest alloy steels). This company has produced this valuable product under its brand for the first time, which makes the product another honor for the company.

RSCo PEX pipe manual press

Information:

Ability to press all types of pipes and 5 layered attachments (superpipe, new pipe, unique pipe).
Steel jaws in 4 sizes: 16, 20, 25, 32.
Sealing warranty till 16th pressure.
Metallic strongbox.
Guide book with Hex wrench screws.
This press contains ISO 9001 and CE standards.
RSCo 1 year warranty.

RSCO Inverter Welding Machine RSG220

$141.12

RSCO Welding Inverter

Information:

To weld all kinds of iron galvanized, steel, carbon steel, cast iron, and etc.
Working current: 20-220 amp
6 automatic charging capacitors
IGBT technology
Input power swing system
Industrial fireproof high-pressure input power cable
Voltage increasing in high frequency and low welding spraying technology, significant welding arc, and easy usability
Weldable electrodes' sizes: 2, 2.5, 3.2, 4 mm permanently and 5 mm cross-sectionally
Suitable size, lightweight, low power consumption
High-pressure sensor
Ability to weld penetrating electrodes cross-sectionally
Automatic arc adjustment system
3 separate electronic boards
Toshiba Japan IC
Voltage: AC220V ±20%
Frequency: 50-60 Hz
Power factor: 0.73
No-load voltage: 60 V
Input power: 7.3 kW
Weight: 7.43 kg
Weldable electrodes: all types of steel electrodes, iron electrodes, cast iron electrodes
Automatic electrode adhesion system
Miniature fuse to control the input power
Can be used in high temperatures and tropical regions
Accessories: refractory torch and cable, refractory ground cable and clamp, mask, combination wire brush
ISO, SGS and, CE standards
30-months warranty and 5-years after-sale services
Contact us for more information

air pneumatic grease pump,
air operated grease pump cheap

RSCo Pneumatic Grease Pump PGP45L

$266.40

Pneumatic Grease Pump

Information:

For lubrication of all types of bearings, all cars, industrial devices, etc.
Pneumatic operating system
Tank capacity: 45 liters
Weight tolerance: 45 kg
Wheeled for easy transport
Maximum inlet pressure: 6-8 bar
Output pressure: 300-400 bar
Internal wind pressure: 6-8 bar (PSI 87-116) (If the pressure is lower, the device will not work and if it is higher, it will lock the device)
Output pressure: 1 to 60
Pumping rate: 0.85 liters per minute
High pressure rubber hose with dimensions 4M × 6mm × 16mm
Accessories: ring replacement kit, paper washer, spring, oil, valve, etc.
Dimensions: 400*400*830 mm
Unique and ergonomic design
Including travel pellet, head of grease pumps, high-pressure double-hose pressed and etc.
Weight: 17 kg
Contact us for more information

RSCO Digital PPR welding machine model RPWD6

$87.30

PPR pipe welding machine

Information:

It has the capability of welding PPR pipes.
welding size: 2 inch, PVC and PPR pipe 20-63 mm
6 Kalibr Die casting industrial Teflon size: 20-25-32-40-50-63 mm
Input voltage: 220-230 v
Power: 2500 w
Working temperature: 0 to 320 degrees with main thermostat
Internal and external wiring are fireproof
Light plastic body from polyamide fireproof.
Digital screen.
12 months warranty and 5 years sale service.
accessories: Guide catalog, base, meters, Allen wrench, PPR pipe cutter, gloves.
ISO 9001 & CE.

RSCO water leak detector with high quality| on RSCO

RSCO water leak detector WLD20

$1,742.40

Informtion:

RSCo professional manual leakage finder:

Able to find digitally any leakage under pressure .
Including Digital LCD 7 inches HD Touch screen .
Includes voice amplifier with modulation voice controller for filtering up 10 levels
Ability to work on depth : 50 cm
Deletes different voice frequencies.
Able to find leakages even pointwise and limited in surroundings.
Includes sensitive and qualified headphones.
Working time : 15 H .
Multi-language menu
Working temperature : ( -20 ℃~ +50 ℃ )
Operation system : rechargeable
Charger : USB , 5v 2a
Aluminum box for easy portable
Frequency range of this leak detector : 10000 - 1.
Charging time : 7-8 h .
Equipped with Triangle sensor .
Weight : 8Kg .
Includes ISO9001 and CE from Eueope unioun.
For more info contact us via webpage.

RSCO manual PE pipe welding machine with the best quality

RSCO full hydraulic PE pipe welding machine HPD-250

$1,584.00

RSCO full hydraulic PE pipe welding machine

Information:

The ability to weld PE pipes and fittings of sizes: 90-250mm
Dynamic system : hydraulic
Equipped to strong steel base
Power source :220v 50 hertz
Power : 4.15 kilo watt
Manual or electric gearbox scraper 1.1 kilo watt with hardened steel blades
A 2.3 kilo watt electric heater with PTFE cover
Power hydraulic pump : 0.75 kilo watt
Pressure range : 0-6.3 mega pascal
Maximum heater temperature : 270 degrees
Working temperature : 170-250
Temperature deviation : +/- 5 degrees
Weight : 145 kg
Jaws made of die casting aluminum with electrostatic paint cover
Packed in wooden pallet for easy handling
Ability to display voltage input
Temperature system display and its accurate adjustment in digital form
Ability to display amperage output
Made of flat coupling with industrial cover for easy connection and increased lifespan
Internal jaws sizes: 90, 110, 125, 140 , 160 , 180 , 200 , 225 mm
All Rastegar Sanat HDPE pipe welding machines are made of 100% pure aluminum alloy
1-year warranty and 10-years after-sale services of RSCo
ISO 9001 and CE standards
For more info contact us via webpage

Manual Puller and Bearing Separator

فیلتر محصولات

مرتب سازی :

FORZA Two Leg Puller model 1015

$177.30

FORZA Two Leg Puller Information: The body is made of forged steel alloy It can be used for pulleys that needs to be removed by pulley nails outside the pulley. Minimum workable size : 60 mm Maximum applicable size :...

MAHDAVI Three Leg Puller P1 | Multi-hole legs | online shop

MAHDAVI Three Leg Puller model P1

$16.63

MAHDAVI Three Leg Puller Information: Used to remove and place all kinds of industrial pulleys Ability to become a two leg puller Material: steel alloy arm Length: 125 mm Reversible claw legs The wrench section is on...

MAHDAVI Three Leg Puller P2 | Reversible claw legs

MAHDAVI Three Leg Puller model P2

$19.71

MAHDAVI Three Leg Puller Information: Used to remove and place all kinds of industrial pulleys Ability to become a two leg puller Material: steel alloy arm Length: 175 mm Reversible claw legs The wrench section is on...

MAHDAVI Bearing Splitter Puller | Sloping double-sided plate

MAHDAVI Bearing Splitter Puller 0

$12.69

Bearing Splitter Information: Used to hold the pieces Made of ductile iron One flat side and one plate shape side Two side screws for mounting on the piece Maximum reach: 60 mm Sloping double-sided plate Internal...

MAHDAVI Bearing Splitter 000

$36.45

Bearing Separator Information: Used to hold the pieces Made of ductile iron One flat side and one plate shape side Two side screws for mounting on the piece Maximum reach: 60 mm Sloping double-sided plate Internal...

FORZA Three Leg Puller model 1760

$177.26

FORZA Three Leg Puller Information: The body is made of forged steel alloy The tip of the shaft can be rotated 60 degrees Due to narrow edges suitable for tight spaces Arm length: 200 mm Capability: 210 mm The length...

MAHDAVI Bearing Separator 001

$17.28

Bearing Splitter Puller Information: Used to hold the pieces Made of ductile iron One flat side and one plate shape side Two side screws for mounting on the piece Maximum reach: 90 mm Sloping double-sided plate...

MAHDAVI Three Leg Puller P3

$30.69

MAHDAVI Three Leg Puller Information: Used to remove and place all kinds of industrial pulleys Ability to become a two leg puller Material: steel alloy arm Length: 240 mm Workable diameter: 200 mm Reversible claw...

MAHDAVI Three Leg Puller P4

$34.92

Three Leg Puller Information: Used to remove and place all kinds of industrial pulleys Ability to become a two leg puller Material: steel alloy arm Length: 310 mm Reversible claw legs Workable diameter: 280 mm The...

RSCO Inner Bearing Puller | Heated jaws & high endurance

RSCO Inner Bearing Puller model TMP130

$87.30

RSCO Inner Bearing Puller Information: It can take all kinds of bearings and pulleys in different sizes from inside and pull it out Suitable for removing all kinds of gears, bearings, grease retainers, etc. Sturdy...

MAHDAVI Three Leg Puller P5 | Reversible claw legs| low price

MAHDAVI Three Leg Puller model P5

$45.36

MAHDAVI Three Leg Puller Information: Used to remove and place all kinds of industrial pulleys Ability to become a two leg puller Material: steel alloy arm Length: 380 mm Reversible claw legs The wrench section is on...

MAHDAVI Three Leg Puller P6 | Reversible claw legs

MAHDAVI Three Leg Puller model P6

$48.78

MAHDAVI Three Leg Puller Information: Used to remove and place all kinds of industrial pulleys Ability to become a two leg puller Material: steel alloy arm Length: 450 mm Reversible claw legs The wrench section is on...

FORZA Three Leg Puller model 7301LT

$98.10

FORZA Three Leg Puller Information: Made of forged alloy steel 120 degrees It can also be used as two legs with an angle of 180 degrees Four holes on the arms to adjust the Puller Puller nails have a middle slot to...

FORZA Three Leg Puller model 7304LT

$96.44

FORZA Three Leg Puller model 7307LT

$147.24

FORZA Three Leg Puller model 7308LT

$158.76

FORZA Two Leg Puller model 2435

$273.96

FORZA Two Leg Puller Information: The body is made of forged steel alloy workable size : 350 mm Arm length: 200 mm The length of the cross : 425 mm As a slider Weight: 9 kg Made in Spain Contact us for more information

FORZA Two Leg Puller model 2430

$222.84

FORZA Two Leg Puller Information: The body is made of forged steel alloy workable size : 240 mm Arm length: 205 mm The length of the cross : 325 mm As a slider Weight: 7.74 kg Made in Spain Contact us for more...

GROZ Three Leg Puller 8 inch

$15.30

GROZ Three Leg Puller Information: Used to remove and place all kinds of industrial pulleys The center screw is made of steel Length: 8 inch Reversible claw legs The wrench section is on the central nut to prevent...

HEZBURN Two Leg Puller model 64421

$20.88

HEZBURN Two Leg Puller Information: Used to remove and place all kinds of industrial pulleys Made of forged iron Middle shaft height: 100 mm Arm length: 80 mm Workable diameter: 35 mm Impact resistant Made in Taiwan...

Showing 21-40 of 79 item(s)

RSCo PEX pipe manual press MP-W32

RSCO Inverter Welding Machine RSG220

RSCO Welding Inverter

RSCo Pneumatic Grease Pump PGP45L

RSCO Digital PPR welding machine model RPWD6

RSCO water leak detector WLD20

RSCO full hydraulic PE pipe welding machine HPD-250

Manual Puller and Bearing Separator

FORZA Two Leg Puller model 1015

MAHDAVI Three Leg Puller model P1

MAHDAVI Three Leg Puller model P2

MAHDAVI Bearing Splitter Puller 0

MAHDAVI Bearing Splitter 000

FORZA Three Leg Puller model 1760

MAHDAVI Bearing Separator 001

MAHDAVI Three Leg Puller P3

MAHDAVI Three Leg Puller P4

RSCO Inner Bearing Puller model TMP130

MAHDAVI Three Leg Puller model P5

MAHDAVI Three Leg Puller model P6

FORZA Three Leg Puller model 7301LT

FORZA Three Leg Puller model 7304LT

FORZA Three Leg Puller model 7307LT

FORZA Three Leg Puller model 7308LT

FORZA Two Leg Puller model 2435

FORZA Two Leg Puller model 2430

GROZ Three Leg Puller 8 inch

HEZBURN Two Leg Puller model 64421

Menu

منو سایت

Search