Home
>
Brands
>
ان ای سی - NEC

RSCo PEX pipe manual press MP-W32

$99.00

Explanations:

This press machine has been developed with the hard efforts of innovators and engineers of this company with the best technology in the world, using a variety of CNC and NC machines and hot Forging method (with the highest alloy steels). This company has produced this valuable product under its brand for the first time, which makes the product another honor for the company.

RSCo PEX pipe manual press

Information:

Ability to press all types of pipes and 5 layered attachments (superpipe, new pipe, unique pipe).
Steel jaws in 4 sizes: 16, 20, 25, 32.
Sealing warranty till 16th pressure.
Metallic strongbox.
Guide book with Hex wrench screws.
This press contains ISO 9001 and CE standards.
RSCo 1 year warranty.

RSCO Inverter Welding Machine RSG220

$141.12

RSCO Welding Inverter

Information:

To weld all kinds of iron galvanized, steel, carbon steel, cast iron, and etc.
Working current: 20-220 amp
6 automatic charging capacitors
IGBT technology
Input power swing system
Industrial fireproof high-pressure input power cable
Voltage increasing in high frequency and low welding spraying technology, significant welding arc, and easy usability
Weldable electrodes' sizes: 2, 2.5, 3.2, 4 mm permanently and 5 mm cross-sectionally
Suitable size, lightweight, low power consumption
High-pressure sensor
Ability to weld penetrating electrodes cross-sectionally
Automatic arc adjustment system
3 separate electronic boards
Toshiba Japan IC
Voltage: AC220V ±20%
Frequency: 50-60 Hz
Power factor: 0.73
No-load voltage: 60 V
Input power: 7.3 kW
Weight: 7.43 kg
Weldable electrodes: all types of steel electrodes, iron electrodes, cast iron electrodes
Automatic electrode adhesion system
Miniature fuse to control the input power
Can be used in high temperatures and tropical regions
Accessories: refractory torch and cable, refractory ground cable and clamp, mask, combination wire brush
ISO, SGS and, CE standards
30-months warranty and 5-years after-sale services
Contact us for more information

air pneumatic grease pump,
air operated grease pump cheap

RSCo Pneumatic Grease Pump PGP45L

$266.40

Pneumatic Grease Pump

Information:

For lubrication of all types of bearings, all cars, industrial devices, etc.
Pneumatic operating system
Tank capacity: 45 liters
Weight tolerance: 45 kg
Wheeled for easy transport
Maximum inlet pressure: 6-8 bar
Output pressure: 300-400 bar
Internal wind pressure: 6-8 bar (PSI 87-116) (If the pressure is lower, the device will not work and if it is higher, it will lock the device)
Output pressure: 1 to 60
Pumping rate: 0.85 liters per minute
High pressure rubber hose with dimensions 4M × 6mm × 16mm
Accessories: ring replacement kit, paper washer, spring, oil, valve, etc.
Dimensions: 400*400*830 mm
Unique and ergonomic design
Including travel pellet, head of grease pumps, high-pressure double-hose pressed and etc.
Weight: 17 kg
Contact us for more information

RSCO Digital PPR welding machine model RPWD6

$87.30

PPR pipe welding machine

Information:

It has the capability of welding PPR pipes.
welding size: 2 inch, PVC and PPR pipe 20-63 mm
6 Kalibr Die casting industrial Teflon size: 20-25-32-40-50-63 mm
Input voltage: 220-230 v
Power: 2500 w
Working temperature: 0 to 320 degrees with main thermostat
Internal and external wiring are fireproof
Light plastic body from polyamide fireproof.
Digital screen.
12 months warranty and 5 years sale service.
accessories: Guide catalog, base, meters, Allen wrench, PPR pipe cutter, gloves.
ISO 9001 & CE.

RSCO water leak detector with high quality| on RSCO

RSCO water leak detector WLD20

$1,742.40

Informtion:

RSCo professional manual leakage finder:

Able to find digitally any leakage under pressure .
Including Digital LCD 7 inches HD Touch screen .
Includes voice amplifier with modulation voice controller for filtering up 10 levels
Ability to work on depth : 50 cm
Deletes different voice frequencies.
Able to find leakages even pointwise and limited in surroundings.
Includes sensitive and qualified headphones.
Working time : 15 H .
Multi-language menu
Working temperature : ( -20 ℃~ +50 ℃ )
Operation system : rechargeable
Charger : USB , 5v 2a
Aluminum box for easy portable
Frequency range of this leak detector : 10000 - 1.
Charging time : 7-8 h .
Equipped with Triangle sensor .
Weight : 8Kg .
Includes ISO9001 and CE from Eueope unioun.
For more info contact us via webpage.

RSCO manual PE pipe welding machine with the best quality

RSCO full hydraulic PE pipe welding machine HPD-250

$1,584.00

RSCO full hydraulic PE pipe welding machine

Information:

The ability to weld PE pipes and fittings of sizes: 90-250mm
Dynamic system : hydraulic
Equipped to strong steel base
Power source :220v 50 hertz
Power : 4.15 kilo watt
Manual or electric gearbox scraper 1.1 kilo watt with hardened steel blades
A 2.3 kilo watt electric heater with PTFE cover
Power hydraulic pump : 0.75 kilo watt
Pressure range : 0-6.3 mega pascal
Maximum heater temperature : 270 degrees
Working temperature : 170-250
Temperature deviation : +/- 5 degrees
Weight : 145 kg
Jaws made of die casting aluminum with electrostatic paint cover
Packed in wooden pallet for easy handling
Ability to display voltage input
Temperature system display and its accurate adjustment in digital form
Ability to display amperage output
Made of flat coupling with industrial cover for easy connection and increased lifespan
Internal jaws sizes: 90, 110, 125, 140 , 160 , 180 , 200 , 225 mm
All Rastegar Sanat HDPE pipe welding machines are made of 100% pure aluminum alloy
1-year warranty and 10-years after-sale services of RSCo
ISO 9001 and CE standards
For more info contact us via webpage

ان ای سی - NEC

فیلتر محصولات

مرتب سازی :

copy of Cut off saw

$188.64

Cut off saw Information : Cut off saw is suitable for cutting tough material like iron and profile. Speed : 3750 round per minute Power : 2200 W Sheet diameter : 335 mm Working Voltage : 220 V Equipped with lock...

copy of Dewalt Blower

$37.80

Blower Information : We use blower with high pressure to clean dust . Speed without load : 16000 -0 round per minute. Air output : 4.5 per minute . Out put nozzel for an easy operation. Able to set the speed. Engine...

RSCo Gasoline Chainsaw G-RCG | Engine power: 1800 w | RSCo

Out-of-Stock

copy of Gasoline chainsaw RSCO model G-RCG

Gasoline Tree Saw Information: Used for cutting trees, pruning trees or preparing firewood Source power: gasoline Engine power: 1800 w Oil capacity: 260 mL Oil to fuel ratio: 1:40 Fuel capacity: 520 mL Maximum speed:...

electric chainsaw,
electric chainsaw price

Out-of-Stock

NAC electric tree saw model DBB-40

Electric Tree Saw Information: Used for cutting trees, pruning trees or preparing firewood Source power: electricity Blade size: 40 cm Engine power: 2000 w Chain speed: 800 meters per minute Unique and ergonomic...

NEC Sanding Machine

$63.00

Sanding Machine Sheet Sander Information : Sanding Machine Sheet Sander is so practical which is used for painting to remove scratches on wood. Speed without load : 6000-14000 round per minute . Input Power : 250...

NEC Air Sander Machine model 3101

$63.90

Pneumatic Sander Machine Information: For polishing and sanding wooden, plastic, metal and etc. Pneumatic operating system Power : 430 V Equipped to long handle Equipped to dimer for adjust speed Speed : 6000-13000...

NEC Angle Grinder model 1169

$34.20

angle grinder Information : We use Angle Grinder to cut stone , tile , plastic , metal , .... Suitable for all types of cutting and polishing Anti-slip and Anti-sweat plastic cover handles No-load speed : 11000 rpm...

NEC Angle Grinder model 1188

$43.02

Angle Grinder Information : We use Angle Grinder to cut stone , tile , plastic , metal , .... Suitable for all types of cutting and polishing Anti-slip and Anti-sweat plastic cover handles. Equipped to spindle lock...

NEC Angle Grinder model 1198

$57.56

angle grinder Information : We use Angle Grinder to cut stone , tile , plastic , metal , .... Anti-slip and Anti-sweat plastic cover handles No-load speed : 11500 rpm Power : 1150 w Disc diameter: 115 mm Input...

NEC Angle Grinder model 2418

$127.80

NEC Angle Grinder Information : We use Angle Grinder to cut stone , tile , plastic , metal , .... Anti vibration handles. power : 2300 W Anti-slip and Anti-sweat plastic cover handles Speed : 8300 rpm Input Voltage :...

Out-of-Stock

NEC Angle Grinder model 2723

NEC Angle Grinder Information : We use Angle Grinder to cut stone , tile , plastic , metal , .... Suitable for all types of cutting Anti vibration handles power : 2400 W Anti-slip and Anti-sweat plastic cover...

Out-of-Stock

NEC Argon Welding Machine 200 amp

Argon Welding Machine Information: To weld all kinds of light and heavy industrial sheets Maximum input current: 200 amp Source power: electricity Input voltage: 70 V Frequency: 50-60 Hz Output current range: 5-200...

Out-of-Stock

NEC Argon Welding Machine 200A

Argon Welding Machine Information: To weld all kinds of light and heavy industrial sheets Maximum input current: 200 amp Source power: electricity Input voltage: 220 V Frequency: 50-60 Hz Output current range: 5-200...

Out-of-Stock

NEC Circular Saw model 1923

Circular saw Information : Circular saw is a very practical tool in carpentry and can cut length and width and to make curve. Speed without load : 4600 round per minute Power : 2400 w Input Voltage : 220 V Including...

NEC Demolition Drill Hammer model 0810

$98.10

Demolition Drill Hammer Information : This demolish drill hammer is used to destroy concrete and wall and asphalt . Strike quantity : 2900 strikes per minute. It has aluminum instead of magnesium in gear box...

Out-of-Stock

NEC Demolition Drill Hammer model 1446

Demolition drill hammer Information : This demolition drill hammer is used to destroy concrete and wall and asphalt . Power : 1300 w Strike quantity : 3900 per minute. Strike power : 22 Joule Working Voltage :...

NEC Demolition Drill Hammer model 1465

$217.80

Demolition drill hammer Information : This demolition drill hammer is used to destroy concrete and wall and asphalt . Power : 1240 w Strike quantity : 1400 per minute. Equipped to automatic lubrication Strike...

NEC Demolition Drill Hammer model 1770

$271.80

Demolition drill hammer Information : This demolition drill hammer is used to destroy concrete and wall and asphalt . Power : 1700 w Strike quantity : 1850 per minute. Gear box has aluminum instead of magnesium...

Out-of-Stock

NEC Demolition Drill Hammer model 1775

Demolition drill hammer Information : This demolition drill hammer is used to destroy concrete and wall and asphalt . Power : 1700 w Strike quantity : 1900 per minute. Equipped to handle with anti_slip system...

Out-of-Stock

NEC Demolition Drill Hammer model 1785

Demolition drill hammer Information : This demolition drill hammer is used to destroy concrete and wall and asphalt . Power : 1700 w Strike quantity : 1500 strikes per minute. Strike power : 50 Joule Voltage : 220...

Showing 1-20 of 71 item(s)

RSCo PEX pipe manual press MP-W32

RSCO Inverter Welding Machine RSG220

RSCO Welding Inverter

RSCo Pneumatic Grease Pump PGP45L

RSCO Digital PPR welding machine model RPWD6

RSCO water leak detector WLD20

RSCO full hydraulic PE pipe welding machine HPD-250

ان ای سی - NEC

copy of Cut off saw

copy of Dewalt Blower

copy of Gasoline chainsaw RSCO model G-RCG

NAC electric tree saw model DBB-40

NEC Sanding Machine

NEC Air Sander Machine model 3101

NEC Angle Grinder model 1169

NEC Angle Grinder model 1188

NEC Angle Grinder model 1198

NEC Angle Grinder model 2418

NEC Angle Grinder model 2723

NEC Argon Welding Machine 200 amp

NEC Argon Welding Machine 200A

NEC Circular Saw model 1923

NEC Demolition Drill Hammer model 0810

NEC Demolition Drill Hammer model 1446

NEC Demolition Drill Hammer model 1465

NEC Demolition Drill Hammer model 1770

NEC Demolition Drill Hammer model 1775

NEC Demolition Drill Hammer model 1785

Menu

منو سایت

Search