Atlas Copco Air Needle Scaler

Air Needle Scaler

Information:

• To eliminate welding appendages
• Pneumatic operating system
• Capacity: 3 mm in 19 pieces
• Hose size: 6.5 mm
• Unique and ergonomic design
• Total length: 176 mm
• Number of beats per minute: 4200 
• Weight: 2.5 kg
• Made in Japan
• Contact us for more information

Air Needle Scaler

Information:

• To eliminate welding appendages
• Pneumatic operating system
• Capacity: 3 mm in 12 pieces
• Hose size: 6.5 mm
• Unique and ergonomic design
• Total length: 210 mm
• Number of beats per minute: 4000 
• Weight: 1.2 kg
• Made in Japan
• Contact us for more information

Air Needle Scaler

Information:

• To eliminate welding appendages
• Pneumatic operating system
• 40 Hz beats
• Hose size: 10 mm
• Unique and ergonomic design
• Total length: 370 mm
• Air inlet size: 1/4 inch
• Weight: 2.35 kg
• Made in Sweden
• Contact us for more information

Air Die Grinder 

Information:

• Used in delicate works of art related to wood and metal, such as engraving, grooving, drilling, design, polishing, etc.
• Speed in idle mode: 22000 rpm
• Pneumatic operating system
• Exhaust embedded in the front of the device
• Working pressure: 6 bar
• Air consumption: 0.50 min / M3
• Total length: 189 mm
• Chuck diameter: 6 mm
• Shaft diameter: 6 mm
• Made in Japan
• Contact us for more information

Air Die Grinder 

Information:

• Used in delicate works of art related to wood and metal, such as engraving, grooving, drilling, design, polishing, etc.
• Speed in idle mode: 23000 rpm
• Pneumatic operating system
• Working pressure: 6.3 bar
• Unique and ergonomic design
• Long mode
• Connection size: 1/4 inch
• Weight: 0.97 kg
• Made in Japan
• Contact us for more information

Air Die Grinder 

Information:

• Used in delicate works of art related to wood and metal, such as engraving, grooving, drilling, design, polishing, etc.
• Speed in idle mode: 23000 rpm
• Pneumatic operating system
• Possibility of 6 hours of continuous work per day
• Long model to work at great depths
• Working diameter: 6 mm
• Connection size: 1/4 inch
• Unique and ergonomic design
• Made in Taiwan
• Contact us for more information

Air Die Grinder 

Information:

• Used in delicate works of art related to wood and metal, such as engraving, grooving, drilling, design, polishing, etc.
• Speed in idle mode: 25000 rpm
• Pneumatic operating system
• Engine power: 224 W
• Working pressure: 6.3 bar
• Air consumption: 74 liters per minute
• Working diameter: 6 mm
• Connection size: 1/4 inch
• Weight: 0.4 kg
• Contact us for more information

Pneumatic Wrench Gun

Information:

• To open and close a variety of high-strength bolts
• Drive size: 22 mm
• Torque range: 200-800 NM
• Hose size: 3/8 inch
• Working pressure: 0.6 Mpa
• Speed in idle mode: 4300 rpm
• Workshop and repair shop uses
• Handle covered with antiperspirant and non-slip plastic
• Weight: 4 kg
• Unique and ergonomic design
• Made in Japan
• Contact us for more information