Click for more products.
No products were found.
×

Super-Ego PE Pipe Roller Cutter 110 -160 mm

Pipe Roller Cutter

Information:

  • To cut PP and PVC pipes
  • Cutting size: 110 -160 mm
  • Full-steel blade
  • High accuracy and easy adjusting
  • Strong aluminum body
  • Made in Spain
  • Contact us for more information
Read moreShow less
$322.20
Delivery: 1 to 3 weeks

فقط 5 عدد در انبار باقیست - پیش از اتمام بخرید

Description

How to work with HDPE pipe:

  • First press the pipe fastener so that the handle and the pipe blade on the HDPE are as large as the size of the rear tube.
  • Then place the tube in the right place.
  • Turn the tube knob  stiffen it and turn the tube half an hour counterclockwise and half an hour counterclockwise
  • After cutting the pipe, the pipe is cut to the point where the pipe is cut
  • Note that the amount of load loaded by the handle is appropriate to the blade on the pipe, this will cause the blade to break if it does not.

When using a pipe for HDPE , the following points are required:

  • Please be aware that the pipe machine on the HDPE is free from any oil and dust, which will increase the life of the machine.
  • Ensure the correct operation of the pipe.
  • Use a special gloves when cutting tubes.

Maintenance of Polyethylene Restagger Tubes Industry:

  • To prolong the life of the pipe, use and clean it every time, and do not rub any oil or dust.
  • The service of a HDPE pipe cutter is sure to be carried out by an authorized service.

To use HDPE pipe, the following points are necessary in the work environment and individual safety:

  • The environment is clean and free from any dust or oil.
  • The presence of any abnormalities in the environment causes a problem.
  • This is an electric insulating device. Please be careful when using.
  • Use a blade suitable for cutting tubes.
  • Avoid pulling the pipe blade without holding the pipe guards. This will smooth the pipe guards.
  • Do not use the tube during sleepiness.
  • Use safety clothing (gloves, shoes, glasses).
  • Do not use HDPE pipes in the event of damage or breakage.
  • Do not hit the tube on polyethylene.

Read more about other products of the industry:

  • Polyethylene wrenches and fittings are used to open and close various types of polyethylene fittings.
  • The industrial scrubber is used to peel HDPE pipes.
  • The skier is used to block the transmission of HDPE pipes.
  • Cutting of polyethylene pipes from a size of 25-160 mm is done by pipe on guillotine.
  • Multi-clamp is also used to hold polyethylene pipes during welding.
  • The clamping of HDPE pipes is used to hold the HDPE pipes at the welding time.
  • Pipe fittings and HDPE joints have the ability to hold polyethylene joints.

Information and accessories:

Pipe roller cutter (size 2)

  • Able to cut PP and PVC pipes from sizes 6-67mm.
  • Full steel blade and aluminum handle.
  • High strength.
  • High precision and easy adjustable.
  • Includes return system with guarantor.
  • Includes ISO9001 and CE.
  • For more information contact us via webpage.

pipe roller cutter,tubing cutters for plastic pipe,pipe cutters , automatic plastic ppe cutters, hdpe pipe cutters ,cutters for hdpe pipers ,cutter for pe pipies , pe pipe cutters ,hdpe roller ,cutters, pe pipi roller cutters,hdpe pipe roller cutter

Read moreShow less
Product Details

Data sheet

Name
Super-Ego PE Pipe Roller Cutter
Device Model
PE Pipe Roller Cutter
shearing size
110 - 160 mm
After-sale services
Available
Function system
manual Rotational
Made of Blade
steel
Made of Body
aluminium
Warranty
No warranty
Quality rating by Rastegar Sanat from 0 to 100
80
Made in
spain
Reviews (0)

No customer reviews for the moment.

You may also like
$387.00

RSCo Hot Air Hand Tool

Information:

  • For welding all kinds of plastic surfaces in grades of PVC, PP, PE, etc.
  • Cooling protective tube
  • Air pressure: 3000 pa
  • Temperature range: 60 - 700 C
  • Thermal element protector at a temperature of 700 degrees
  • Power: 1600 watts of heat
  • Impeller speed: 13000 rpm
  • Output temperature: 120 liters per minute
  • Lightweight and portable
  • Ability to work continuously for up to 8 hours
  • Ceramic interior elements
  • Output temperature adjustment volume
  • Ability to output 3 liters of hot air per minute
  • Shrink ability
  • Dimensions: 470x385x640 mm
  • Weight: 1.6 kg
  • Custom flat and rod nozzle
  • After-sales services of Rastegar Sanat
  • Contact us for more information
$423.00

RSCo Hot Air Hand Tool

Information:

  • For welding all kinds of plastic surfaces in grades of PVC, PP, polyethylene, etc.
  • Cooling protective tube
  • Output temperature: 430 liters per minute
  • Temperature range: 60 - 700 C
  • Thermal element protector at a temperature of 700 degrees
  • Power: 3400 watts of heat
  • Lightweight and portable
  • Shrink ability
  • Custom flat and rod nozzle
  • After-sales services of Rastegar Sanat
  • Contact us for more information
$51.30

RSCo chain pipe wrench

Information:

  • Able to hold PE pipes and joints
  • Able to open and close all kinds of joints of PP, push-fit, and PVC
  • Working size: 50, 63, 75, 90, 110, 125, 140, 160 mm
  • Material: ductile cast iron
  • Full-steel double chain
  • Ability to endurance the high-pressure
  • Chain holder tab.
  • ISO9001 and CE standards
  •  5-years after-sale service
  • For more info contact us via the webpage
$10.53

RSCo PE pipe wrench

Information:

  • Ability of holding PE pipes and joints
  • Able to open and close all kinds of joints of PE and PVC
  • Working size: 50-63-75-90-110-125 mm
  • Material: the best alloyed aluminum
  • Adjustable jaw
  • Power: 500 N
  • ISO9001 and CE standards
  • 5-Years after-sale services
  • For more info contact us via the webpage
$65.70

RSCO pipe Roller Cutter

Information:

  • To cut PP and PVC pipes
  • Cutting size: 100-168 mm
  • Full-steel blade
  • High accuracy and easy adjusting
  • Return system (by using the relevant latch)
  • Strong aluminum body
  • ISO9001 and CE standards
  • Contact us for more information
$62.10

RSCO pipe Roller Cutter

Information:

  • To cut PP and PVC pipes
  • Cutting size: 50-125 mm
  • Full-steel blade
  • Accuracy : 2mm
  • High accuracy and easy adjusting
  • Return system (by using the relevant latch)
  • Strong aluminum body
  • ISO9001 and CE standards
  • Contact us for more information
$143.10

RSCo electrical HDPE pipe welding heater plate

Information:

  • Welding all kinds of PPR pipes and joints
  • Size: 0 - 400 mm (0 - 16 in)
  • European high-pressure push-pull element
  • Temperature rate: 50 - 300 C
  • PTK plate to help better heat rise and temperature transfer 
  • Internal and external fireproof wiring
  • All-metal body and handle with electro-static color
  • Powerful rotary ON-OFF switch
  • Metal elelctro-static color strongbox
  • 1-year warranty and 5-years after-sale services of RSCo
  • ISO9001 and CE standards
  • For more info contact us via the webpage
$107.10

RSCo electrical HDPE pipe welding heat plate

Information:

  • Welding all kinds of PPR pipes and joints
  • Size: 0 - 250 mm (0 - 10 in)
  • Italian push-pull element with high power
  • Temperature rate: 50 - 300 C
  • PTK plate to help better heat rise and temperature transfer 
  • Internal and external fireproof wiring
  • Powerful rotary ON-OFF switch
  • Metal elelctro-static color strongbox
  • 1-year warranty and 5-years after-sale services of RSCo
  • ISO9001 and CE standards
  • For more info contact us via the webpage

Menu

منو سایت