قیچی کابل بر برقی زوپر مدل HH-85

:Introduction of Battery Powered cable cutter

• Cable shields are available in different types depending on the conditions and the amount of pressure or cable used: cable cutter on hand, cable cutters , and cable cutterson a hydraulic cable.
• The cable cutters on the handheld are capable of cutting all kinds of copper, aluminum and ... cables of different sizes.
• The battery cable has a display for displaying battery power, number of cut-outs, and more.

Cable scissors include:

• Fixed jaw
• Movable jaw
• Moving jaw holder handle
• Start button
• The body
• The battery
• Screen
• LED
• The key is on and off
• Device settings

The use of a cable on a cord can be as follows:

• Due to the size of the cable and the amount of pressure available for cable cutting, it is important to know which cable (cable, hand cable, cable for hydraulic and cable for charging).

The following can be considered for using the cable:

• Using the screw on the jaw of the cable on the cord, open the jaw of the cable. (You can use the handle on the jaw of the cable to charge the jaw).
• Place the cable between the cable jaw on the cord.
• Moving the jaw on the cable first.
• Press the start button on the cord and cause the cable blade to move forward (it will cut the cable).
• The cable blade returns to the first position after the cut, or the cable can be removed by using the clutch to charge the cord.

To use this cable pay attention to the following for more safety:

• Avoid contact with sharp objects, steel, metal and ... to the jaw and cable blade on a rechargeable battery.
• This cable is suitable for cutting copper and aluminum cables (do not use the cable for other cables of different gender).
• This cable is not on the electrical insulating cord when using.
• Avoid putting too much pressure on cable.

For more information on other power cable equipment:

• Power cable equipment including cable scissors and hydraulic cable presses.
• Cable cutters on handhelds include large cable scissors, cable scissors on average, cable scissors on small handles.
• Cable cutters are used to cut all kinds of copper and aluminum cables.
• Cable cutters are used for hydraulic cutting of copper, aluminum and copper cables.
• The cable cutters have the ability to press copper and aluminum cables.
• The hydraulic cable press also features a variety of copper and aluminum cables.

Read more about other products of the industry:

• ppr Pipe welding is a specially designed plumbing fixtures for green tubing, heat and steel pipe, white iron ironing machines, whitewashing iron, plumbing, plastic welders, ppr pipe welding.
• For more information and prices, please contact the sales office.
• ppr pipe cutter, such as pipe cutters,ppr pipe cutting cutters, electric pipe cutters, polyethylene pipe cutters plumbing cutters, for cutting ppr pipes.
• A green tube welding machine consists of several mouths (green tube caliber) that is performed by bringing the boiling temperature to the boiling point.
• A welding machine with a name of plastic welding machine, a second-line polyethylene welding machine, a fully-welded polyethylene welding machine, a plastic welding machine, a pipe-welded tube and polyethylene fittings of 63 to 160 mm in size.
• Polyethylene welding iron is also capable of welding all polyethylene pipes.
• Polypropylene Polypropylene pipes are used to cut pe and propylene pipes from 50 to 127 mm in size.
• The Polypropylene Tube Wrench is an industry capable of opening and closing all kinds of polyethylene fittings and PVC fittings.
• Five-layer pipe presses include five-layer, five-layer, five-layer, pex pipe presses, five-layer pipe hydraulic presses.
• All pex, five-piston tube presses have five-layer connectors (SuperPyp, UnixPipe, NewPipe).
• The outer layer of the five-layer pipe can be penetrated by a five-layer tube.
• The five-layer pipes can be bent with a five-layer pipe, and they are riveted to penetrate the five-layer tubes by a five-layer pipe riveting.
• To bend these types of pipes, the five-layer industrial pipe bender is used.
• To keep the pipe in the shape of a deformation, you can use the roller of the pex industrial pipe.
• The rastegar Industrial Pump Test Machine has been designed with a unique design, light weight to test and test the piping of pipelines and reservoirs.
• rastegar Industrial Company is able to repair the water piping test machine. So you can refer to the office of Rastgar Industry for the repair of the water pipe testing machine.
• To leak the pressure pipes, we introduce the industry-leading mini-leak detector. The industry has gas leak detectors.
• For repairs of polyethylene welding machines, polyethylene boiling iron, green tube iron, pump testing machine, five-layer pipe presses, welding inverters and leak detectors, please refer to the sales office of the industry.
• Stainless steel extruder is also used to repair pipe and fittings of polyethylene.
• The high-pressure welding extruder of the industry is used as a welding pipe and polyethylene fittings.
• Due to the fact that steel and galvanized pipes are used today, electric devices are used to carry out these types of pipes.
• The industrial scrapper is used to peel polyethylene pipes.
• The squezeer is used to block the transmission of polyethylene pipes
• Cutting of polyethylene pipes from a size of 25-160 mm is done by pipe on guillotine.
• Multi-clamp is also used to hold polyethylene pipes during welding.
• The clamping of polyethylene pipes is used to hold the polyethylene pipes at the welding time.

Information :

Battery Powered cable cutter

• Ability to press copper ,aluminum cable
• Steel jaw with high strength
• Ability to install press jaw of aluminum and steel pipe and connection
• Ability to install press jaw ,cut the industrial cutter
• Rotation ability of the head of cutter : (180 degree)
• Voltage: (12w)
• Easy work
• Plastic cover of handle
• Anti slip handle
• Power supply: ( chargeable and battery )
• Weight: (11kg)
• LCD screen to show battery level and press times
• Resistant plastic box
• ISO 9001 & CE