Sumak Pneumatic Nibbler model ST-6620

Pneumatic Nibbler

Information:

• It is suitable for cutting metal sheets.
• Pneumatic operating system
• Unique and ergonomic design
• Ability to work with all types of air compressor
• Blades made of steel
• It has silver cover that it is sensitive to pressure
• Overall length : 25.5 cm
• Equipped to air exhaust
• Hose diameter : 3.8 inch
• Air pressure : 6.2 bar
• Speed : 2500 rpm
• Air inlet size: 1.4 inch
• Cutting depth in steel : 1.2 mm
• Cutting depth in aluminum : 1.4 mm
• Weight : 1.35 kg
• Made in Taiwan
• Contact us for more information

Pneumatic Nibbler

Information:

• It is suitable for cutting metal sheets.
• Pneumatic operating system
• Unique and ergonomic design
• Ability to connect to all types of air compressor
• It has high quality
• Equipped to air exhaust
• Device length : 255 mm
• Ability to work without making metal chips
• Air pressure : 6.2 bar
• Speed : 2500 rpm
• Air inlet size: 1.4 inch
• Cutting depth in steel : 1.2 mm
• Cutting depth in aluminum : 1.4 mm
• Weight : 1.1 kg
• Made in Taiwan
• Contact us for more information

Pneumatic Nibbler

Information:

• It is suitable for cutting metal sheets.
• Pneumatic operating system
• Unique and ergonomic design
• Ability to connect to all types of air compressor
• Cutting width : 5.6 mm
• Hose diameter : 3.8 inch
• Without making metal chips
• Air pressure : 6.2 bar
• Speed : 2500 rpm
• Air inlet size: 1.4 inch
• Cutting depth in steel : 1.2 mm
• Cutting depth in aluminum : 1.4 mm
• Weight : 1.14 kg
• Made in Taiwan
• Contact us for more information

Pneumatic Nibbler

Information:

• It is suitable for cutting metal sheets.
• Pneumatic operating system
• Unique and ergonomic design
• It has ergonomic handle with anti_over cooling system
• It has straight body
• Air pressure : 6.2 bar
• Speed : 2200 rpm
• Air inlet size: 1.4 inch
• Cutting depth in steel and hard metals : 1.6 mm
• Cutting depth in aluminum and soft metals : 2 mm
• Weight : 1 kg
• Warranty : 6 months and after_sale service
• Made in Taiwan
• Contact us for more information

Pneumatic Nibbler

Information:

• It is suitable for cutting metal sheets.
• Pneumatic operating system
• Unique and ergonomic design
• It has straight body
• Speed : 2700 rpm
• Air inlet size: 220 liter/min
• Cutting depth in steel and hard metals : 1 mm
• Cutting depth in aluminum and soft metals : 1.2 mm
• Device length : 270 mm
• Weight : 1.23 kg
• Warranty : 6 months and after_sale service
• Made in Japan
• Contact us for more information

Air Polisher

Information:

• For cutting stone, plastic, cutting and polishing metals or removing excess material from a piece
• Pneumatic operating system
• Power: 4.5 kW
• Idle speed: 6000 rpm
• Equipped with sound silencer to reduce noise
• Ability to control speed
• Unique and ergonomic design
• Weight: 4.5 kg
• Made in Sweden
• Contact us for more information

Air Angle Grinder

Information:

• For cutting stone, plastic, cutting and polishing metals or removing excess material from a piece
• Pneumatic operating system
• Power: 2.5 kw
• Idle speed: 12000 rpm
• Air consumption: 34 liters per second
• Sound pressure: 75 dB
• Maximum working pressure: 6.3 bar
• High strength to weight
• Weight: 2.1 kg
• Made in Sweden
• Contact us for more information

Straight Air Screwdriver

Information:

• To open and close a variety of high-strength screws
• Pneumatic operating system
• Torque control capability
• Torque range: 0.005-0.025 NM
• Speed in idle mode: 1000 rpm
• Total length: 132 mm
• Unique and ergonomic design
• Weight: 0.099 kg
• Ideal for confined spaces
• Clutch system
• Silent operation
• Made in Sweden
• Contact us for more information