RSCO electric pex pipe press EMZ-1632

Introducing pex pipe Press Tube Press:

• Pex pipe tube press is used to press pipes and fittings.
• It is worth noting that pex pipes are pressed with pex pipe presses.
• These presses include manual pex pipe pressespex pipe press hydraulic pipe presses, pex pipe presses, and pex pipe presses.
• All pex pipe press flexible pipe presses are capable of pressing all pipes and fittings (SuperPip, NewPipe, Unicip Pip).

• Introduction of electric press:
• Jaw presses for welding and interchangeable jaws.
• The set piece for this machine is pex pipe press for adjusting the jaws.
• The warning light is for showing the status of the device .
• The trigger of pex pipe-loaded press machine is for the start-up of the machine.
• Return button for manual piston return when the function is in the wrong mode.
• The status lamp of the crimping press is used to indicate the device status and warning.
• The battery button is a pex piepe charger tube for opening and closing the battery.
• The battery is a device for propulsion of the device.
• It includes two batteries,one charger, one sealing cylinder one pakage of safe tap.

Know more:

• Firstly, the pex pipe press can be cut with a cutter (or pipe cutter, pipe cutter, pipe shears, ppr pipe cutter, ppr pipe cutting shears)
• Cut it to the desired size with a caliber tool inside the pex pipe (it can be bended through the pex pipe by bending the pipes)
• Slightly loosen and using the blades at the end of the caliber, with the rotary motion of the inner wall of the pex pipe (which can be riveted by rolling the pex pipe into these pipes).
• It is very important to do this because the pex pipe wall can be bended with the five-layer tube bending spring before winning the calibration.
• Therefore, the rubber thread may break the connection during installation, which can lead to false positives and leakage of water.
• In the end, after the first caliper, the connecting pin of the five-layer pipe (which can be pressed by a pex pipe, which includes a pex pipe , electric, manual, and hydraulic press) is pressed.
• In the installation procedure for fittings such as couplings, it is necessary to calibrate the pex pipes (which are installed with a pex pipe) before installation.
• Then, the pex pipe can be fitted with a manual press of a pex industrial pipe.
• These pex pipes can be easily opened with the roller opening of the five-layer industrial pipe.
• After the completion of the piping, when the pipes are filled with water, after the pipes are dripping and the openings are closed, we test the tubes by the plumbing test devices (in the form of a manual pump test device and an electric pump test device).
• To detect the pipe fault, the leak detector can be detected by the  professional handheld researcher.
• It also,has gas leak detectors.

Pay attention to these tips while using PEX pipe electric press:

• Batteries can be used up to 1000 times, but the battery life will be charged automatically.
• When starting, check the battery charge and warning light mode to make sure the device is healthy.
• Select the correct jaw size for the job.
• Do not use the machine without jaws.
• Place the main jaw inside the appliance and then rotate the adjusting knob clockwise.
• The permitted working temperature is 10-40 ° C.