RSCo Hydraulic Puller model PHP-20

Specifications hydraulic puller

• Hydraulic puller is used to derive various types of industrial puller.
• Hydraulic puller are available in different types in the form of a polysilicon, a hydolic polycatch, a pump polisher, and a pump polisher.
• Hydraulic puller are fixed, two horns, three horns and so on.

To find out how to operate the hydraulic puller, check the following:

• First we open the hydraulic puller horns according to the size of the money. (Open the screws on the holder of the polygonal horn and adjust the polygonal horn as much as desired).
• First we open the hydraulic polish horns according to the size of the money. (Open the screws on the holder of the polygonal horn and adjust the polygonal horn as much as desired).
• Pull the polygonal horn into the piece we want to release. (Note that if the piece that you want to loosen is a bearing, you can use the bearing insert).
• We begin to pump up using the hydraulic polycotry handle (note that this is the case for pump polysilicates for your head.)
• To separate the pump polysilk, first attach the hydraulic pump hose to the hydraulic polycotch connector.
• Then move the hydraulic pump assembly (make sure that the correct connection between the hydraulic pump hose and the pincers is secured).
• After moving the handle, the pulley shaft moves downward.
• The hydraulic pinch shaft begins to press the part where the piece stuck, and eventually release the piece.
• The hydraulic polycotchic has a range of 5 tons to 50 tons, which, depending on the type of work and the amount of pressure applied, can choose the appropriate polisher

When working with a hydraulic pulletr , be sure to:

• Do not strike and collide sharp objects, metal and steel, etc., to polyclonal horns.
• Avoid moving the gun or handle of the hydraulic pump firmly.

Hydraulic polish components include:

• Puller handle
• Pump head (360 degree rotation)
• Hydrologic pump
• Moving horn (main jaw)
• Main chassis
• Device oil control
• Horn Hold Support (Fixed

To find out about the power cord equipment, check the following:

• Power cable equipment including cable cutters and hydraulic cable presses.
• Cable cutters on handhelds include large cable cutters, cable cutters on average, cable cutters on small handles.
• Cable cutters are used to cut all kinds of copper and aluminum cables.
• Cable cutters are used for hydraulic cutting of copper, aluminum and copper cables.
• The cable cutters have the ability to press copper and aluminum cables.
• The hydraulic cable press also features a variety of copper and aluminum cables.
• For cutting of all kinds of plastic or polypropylene pipes, shear shear shears or shear shears are used.
• pex pipe fittings are pressed by apex pipe press (including apex pipe manual pipe press, a five-layer, pex pipe press,pex pipe press, and a hydraulic press of a pex pipe).
• It is worth noting that in new years, metal pipes, galvanized, have been used, which are made by hand tools or electrical workpieces.
• t should be noted that in the main networks of pipelines, five-layer pipes are used. To open these types of pipes, you can use the roller of the pex industrial pipe.
• It is worth noting that the five-layer pipes bend with a five-layer tube bending machine and riveted with a five-layer pipe piercing device.
• To test the pipe after the completion of the plumbing. When the pipes are filled with water, after testing the pipes and closing the openings, the pipes are tested by plumbing testing machines, which include (manual pump test and electric pump test).
• To leak the pressure pipes, we introduce the industry-leading mini-leak detector. The industry has gas leak detectors.
• For repairs of polyethylene welding machines, polyethylene boiling iron, green tube iron, pump testing machine, pex pipe presses, welding inverters and leak detectors, please refer to the sales office of the industry.
• Stainless steel extruder is also used to repair pipe and fittings of polyethylene.
• The high-pressure welding extruder of the industry is used as a welding pipe and polyethylene fittings.
• Due to the fact that steel and galvanized pipes are used today, electric devices are used to carry out these types of pipes.
• The industrial scrapper is used to peel pe pipes.
• The squzeer is used to block the transmission of polyethylene pipes
• Cutting of polyethylene pipes from a size of 25-160 mm is done by pipe on guillotine.
• Multi-clamp is also used to hold polyethylene pipes during welding.
• The clamping of polyethylene pipes is used to hold the polyethylene pipes at the welding time.
• Welding Razarf Welding Industry has the ability to weld various types of plastic surfaces in PVC, PP, polyethylene.
• The Rossabor copper tube has the ability to cut all kinds of copper and aluminum pipes. And Ripper is a steel wire mesh made of high alloy steel
• Hydraulic bender The five-layer industrial pipe is used to bend all kinds of steel, steel, copper and aluminum pipes.
• Hydraulic polisher is used to get all kinds of industrial money.
• The hand pump is used for winding up to a maximum of 1.9 times.

Information :

Hydraulic puller

• Use with 2 or 3 jaws.
• Hydraulic puller is used to derive various types of industrial puller.
• High quality, forged steel jaws and crosshead provide superior reliability and service.
• Percise hydraulic control allows fast, efficient and safe pulling.
• High force hydraulic system.
• Spring loaded live centering cone.
• Manual release knob.
• Bladder type oil reservior.
• Rapid adjustment.

extracteur hydraulique , kit hydraulique de traction , extracteur hydraulique manuel , extracteur de noix hydraulique , penarik hidrolik , penarik hidrolik manual , penarik kacang terlihat hidrolik , harga penarik hidrolik , гидравлический съемник , гидравлический комплект , гидравлический съемник, гидравлические съемники, extrator hidráulico , olhador hidráulico porca extractor , polia hidráulica manual, extractor hidráulico , extractor hidráulico manual , precio del extractor hidráulico , extractor hidráulico , kit pullar hidráulico, हाइड्रोलिक खींचने वाला , मैनुअल हाइड्रोलिक खींचने वाला , हाइड्रोलिक खींचने की कीमत , हाइड्रोलिक देखो अखरोट खींचने वाला , hydraulischer Abzieher , , manueller hydraulischer Abzieher , Preis für hydraulische Abzieher, hydraulischer Look-Abzieher , հիդրավլիկ փամփուշտ

hydraulic look nut puller_hydraulic puller_puller_hydraulic pullar kit_hydraulic pullers_hydraulic puller jacket_hydraulic puller price _manual hydraulic pullerhydraulic puller