High pressure Extrusion welding machine:
- Able to weld all pipes and surfaces in grades PVC, PP and poly fluoride.
How to work with High pressure Extrusion welding machine:
- Put the extrusion welder in a stable place the set the handle and pin of the extrusion welder.
- Turn on the Hot mode of the source of energy.
- Set the temperature to 300 C while you are welding.
- Turn on the industrial hot air tool set the temperature and after 7 to 8 minutes the nozzle gets hot.
- Turn on the engine of Extrusion welding machine until it starts turning.
- After turning on the device is in stand by mode until 5 or 6 minutes then put the welding bar. and bring the temperature sp high to melt the electrode.
- The engine of PPR spins easily without electrode after putting the melting material Extrusion welding machine will be heavy so immediately turn it off.
Watch out for these types while using the High pressure Extrusion welding machine:
- Opening the device is dangerous due to electric parts please unplug the device before taking it apart.
- Before turning on the device watch out for the wire and plug to be unharmed .
- Get away from flammable and explosive devices while using the hot air tool.
- Do not touch the hot air tool while using , because of the high temperature.
- Please change the brush of the carbon engine after using it to 800 times.
- While you are not using the device put it in the lowest temperature .
- Turn off the air engine after using.
Read more about other products in the industry:
- ppr heater specially designed plumbing fixtures for ppr pipe,heat and steel pipes, ppr pipe, whitewashing heat, plumbing, plastic welds .
- For more information and prices, please contact the sales office.
- ppr pipe cutters, such as pipe cutters,ppr pipe cutting, electric pipe cutter, Pe pipe cutter, plumbing cutters, for cutting ppr pipes.
- A ppr pipe welding machine consists of several mouths (ppr pipe caliber) that is performed by bringing the boiling temperature to the boiling point.
- A welding machine with a name of plastic welding machine, a second-line polyethylene welding machine, a fully-welded polyethylene welding machine, a plastic welding machine, a pipe-welded tube and polyethylene fittings of 63 to 160 mm in size.
- Pe welding heater is also capable of welding all polyethylene pipes.
- Polypropylene pipes are used to cut Pe and Propylene pipes from 50 to 127 mm in size.
- The Polypropylene pipe Wrench is an industry capable of opening and closing all kinds of Pe fittings and PVC fittings.
- Pex pipe presses include Pex pipe presses, Pex pipe hydraulic presses.
- All five-layer, five-piston tube presses have five-layer connectors (SuperPyp, UnixPipe, NewPipe).
- The outer layer of the five-layer pipe can be penetrated by a Pex pipe.
- The Pex pipes can be bent with a Pex pipe, and they are riveted to penetrate the Pex pipes by a Pex pipe riveting.
- To bend these types of pipes, the pipes industrial pipe bender is used.
- To keep the pipe in the shape of a deformation, you can use the roller of the five-layer industrial pipe.
- The rastegar Industrial Pump Test Machine has been designed with a unique design, light weight to test and test the piping of pipelines and reservoirs.
- Rastegar Industrial Company is able to repair the water piping test machine. So you can refer to the office of Rastgar Industry for the repair of the water pipe testing machine.
- To leak the pressure pipes, we introduce the industry-leading mini-leak detector. The industry has gas leak detectors.
- For repairs of polyethylene welding machines, polyethylene boiling heat ppr pipe heater, pump testing machine, Pex pipe presses, welding inverters and leak detectors, please refer to the sales office of the industry.
- Stainless steel extrusion welder is also used to repair pipe and fittings of polyethylene.
- The high-pressure welding extrusion welder of the industry is used as a welding pipe and polyethylene fittings.
- Due to the fact that steel and galvanized pipes are used today, electric devices are used to carry out these types of pipes.
- The industrial scrubber is used to peel Pe pipes.
- The squeezer is used to block the transmission of Pe pipes
- Cutting of polyethylene pipes from a size of 25-160 mm is done by pipe on guillotine.
- Multi-clamp is also used to hold polyethylene pipes during welding.
- The clamping of Pe pipes is used to hold the polyethylene pipes at the welding time.
- Welding Rastegar Welding Industry has the ability to weld various types of plastic surfaces in PVC, PP, polyethylene.
- The Rossabor copper tube has the ability to cut all kinds of copper and aluminum pipes. And Ripper is a steel wire mesh made of high alloy steel
- Hydraulic bender The five-layer industrial pipe is used to bend all kinds of steel, steel, copper and aluminum pipes.
- Hydraulic polisher is used to get all kinds of industrial money.
- The hand pump is used for winding up to a maximum of 1.9 times.
Read moreShow less
English
فارسى
اللغة العربية
