RSCO manual tube bender PBM10-25

Introducing metal pipe bending machine

Various parts of the manual bending tube:

• Jaw (replaceable)
• Jaw changer
• Jaw (replaceable)
• Category

How to work with a hydraulic bending machine:

• First, we attach the appropriate jaws and the size of the tube to the bending tube.
• Place the tube between two jaws.
• By turning the handle, bends the pipe.
• To lengthen the life of the bending machine, clean the appliance after each use and avoid any oil and dust.
• The service of the machine must be carried out by a work service.

Observing the following in the work environment and the individual environment when using metal pipe bending is required:

• Keep the environment clean and free of any oil or dust.
• The presence of any abnormalities in the environment will cause problems
• This is an electric insulating device. Please be careful when using.
• Do not use pipe clamps when you are sleepy.
• Use safety clothing.
• Do not use this tool in the event of a malfunction or fracture.
• Make sure that the machine is working properly.

Additional information about metal pipe equipment:

• The steel factory has a steel pipe clamp and a metal pipe clamp.
• The bending tube is used for steel pipes, steel pipes, stainless steel pipes, welded pipes and circular steel pipes.
• Hydraulic bender with bending ability of metal pipes from 1/2 to 2 inches in size manually at various angles up to 90 degrees.
• The Holliday Rustgar test has the ability to insulate pipes and metal fittings.
• The metal strip strip is capable of pulling insulating tubes from 2 to 56 inches.
• Re-checking cameras have access to piping systems, problems in the cavity wall, problems in water tanks, ducts and air conditioning systems.

Learn more about the products of the industry.

• Manual hydraulic pans are able to punch all kinds of metal sheets.
• Open flange to open or collapse flanges.
• Green iron washer for pipe welding and polypropylene fittings or green and white pipes.
• Polypropylene tubes can be cut with a green tube scissor, or a scissors cutter.
• The butter welding of the polyethylene welding machine should not be used in rainy weather, snowy, intense winds and extreme cold.
• Pe pipe is used to cut polyethylene and propylene pipes from a size of 50 to 127 mm.
• Pe Rustgar Fittings Wrench has the ability to open and close various types of polyethylene fittings and PVC fittings.
• All pex flush pipe presses can be pressed with all five-layer connections (NewPipe, UnixPipe, Isopaype, SuperPip, etc.).
• Polyethylene Rastegar Fittings Wrench has the ability to open and close various types of polyethylene fittings and PVC fittings.
• All five-layer flush pipe presses can be pressed with all pex connections (NewPipe, UnixPipe, Isopaype, SuperPip, etc.).
• You can contact the sales department of Rastgarstalat Company to receive the price list for pex pipe presses
• pex presses: Five-layer tube presses,pex pipe hydraulic presses, pex pipe-loaded presses, pex pipe presses.
• This pex electric tube is used to calibrate (size) all kinds of pex pipes.
• pex bending spring bends are used to bend all kinds of pex pipes in sizes 16-20-25-32
• The pex flexible pipe bender has the ability to bend PVC pipe types,pex pipes, copper and aluminum
• The pex pipes can be riveted with pex pipe pen, and pex pipe openers can be used to open five-layer pipes.
• The industry's plumbing testing equipment is available in two models of hand pump test and electric pump test device.
• Electrofusion welding machine is used for pipe welding and polyethylene fittings.
• Painter tools are used to cut, hold, and punch all kinds of pipes and fittings.
• Metal pipes consist of tubes, electric teeth, honey beetles and stock Rex.
• Welding industry inverter is used for welding all kinds of iron, galvanized steel, steel and cast iron.
• Welding machine including Welding rastegar Industrial Welding Machine is a welding screwdriver.
• The gas leak detection device and the leak detector of the resilient water industry have the ability to leak any type of pressure pipe up to a depth of 30 meters in analog form.
• Tubular opening tubes.
• Cable cutters on handhelds include large cable cutters , cable cutter on average, cable cutter on small handles.
• Cable cutters are used to cut all kinds of copper and aluminum cables.
• Cable cutterss are used for hydraulic cutting of copper, aluminum and copper cables.
• The cable cutterss have the ability to press copper and aluminum cables.
• The hydraulic cable press also features a variety of copper and aluminum cables.
• The riveting nut is used to riveting various types of rivets

information:

manual tube bender

• Bend the metal pipe, steel pipe, stainless steel pipe, wire pipe, circle steel pipe
• Maximum rotation of bend: (180 degree)
• Bend the pipe without any damage
• Material: steel
• Maximum pressure:(16tons)
• Weight: (25kg)
• resistant plastic box
• Function: very fast