KUKEN Straight Impact Wrench KW-4500G

Air Needle Scaler

Information:

• To eliminate welding appendages
• Pneumatic operating system
• Capacity: 3 mm in 12 pieces
• Hose size: 6.5 mm
• Unique and ergonomic design
• Total length: 210 mm
• Number of beats per minute: 4000 
• Weight: 1.2 kg
• Made in Japan
• Contact us for more information

Air Needle Scaler

Information:

• To eliminate welding appendages
• Pneumatic operating system
• 40 Hz beats
• Hose size: 10 mm
• Unique and ergonomic design
• Total length: 370 mm
• Air inlet size: 1/4 inch
• Weight: 2.35 kg
• Made in Sweden
• Contact us for more information

Air Polisher

Information:

• For cutting stone, plastic, cutting and polishing metals or removing excess material from a piece
• Pneumatic operating system
• Power: 4.5 kW
• Idle speed: 6000 rpm
• Equipped with sound silencer to reduce noise
• Ability to control speed
• Unique and ergonomic design
• Weight: 4.5 kg
• Made in Sweden
• Contact us for more information

Straight Air Screwdriver

Information:

• To open and close a variety of high-strength screws
• Pneumatic operating system
• Torque control capability
• Torque range: 0.005-0.025 NM
• Speed in idle mode: 1000 rpm
• Total length: 132 mm
• Unique and ergonomic design
• Weight: 0.099 kg
• Ideal for confined spaces
• Clutch system
• Silent operation
• Made in Sweden
• Contact us for more information

Air Screwdriver Gun

Information:

• To open and close a variety of high-strength screws
• Pneumatic operating system
• Size: 6 mm
• Chuck size: 1/4 inch (6.34 mm)
• Torque range: 11-17 NM
• Speed in idle mode: 2200 rpm
• Air inlet size: 1/4 inch
• Weight: 1.35 kg
• Silent operation
• Made in Japan
• Contact us for more information

Pneumatic Wrench

Information:

• To open and close a variety of high-strength bolts
• Drive size: 1 inch
• Max torque: 2440 NM
• Power: 2000 W
• Input size: 1/2 inch
• Impact rate: 312 beats per minute
• Speed in idle mode: 4000 rpm
• Workshop and repair shop uses
• Double hammer mechanism
• Ergonomic design for user comfort
• Weight: 10 kg
• Made in Korea
• Contact us for more information

Pneumatic Wrench

Information:

• To open and close a variety of high-strength bolts
• Drive size: 1 inch
• Max torque: 2440 NM
• Shaft length: 8 inch
• Inlet size: 1/2 inch
• Speed in idle mode: 4000 rpm
• Workshop and repair shop uses
• Double hammer mechanism
• Unique and ergonomic design
• Made in Korea
• Contact us for more information

Pneumatic Wrench

Information:

• To open and close a variety of high-strength bolts
• Torque range: 1000-5500 NM
• Drive size: 1 1/2 inch
• Screw size: 30-42 mm
• Air inlet size: 1/2 inch
• Total length: 381 mm
• Speed in idle mode: 3800 rpm
• Workshop and repair shop uses
• High power relative to the weight of the device
• Weight: 15 kg
• Ergonomic design for user comfort
• Made in Sweden
• Contact us for more information