Manual Copper and steel bender PBM1/4-3/8

Description of the parts and tasks:

• The duty of the belt is a rigging bolt to tighten the tube.
• The jaw is a rotary bending tube for bending the tube.
• Gear Toggle This is a five-layer pipe bender for providing propulsion.
• Handle the handpiece of the handpiece to get the machine.
• Active bending handle for tube bending operation.
• Roughness bending tube used in a five layer and soft copper tube.
• The bending tube has a soft plastic box.

Size of bending aluminum jaws:

• Weight (kg) Size (mm).
• 0.20 16.
• 0.24 20.
• 0.30 26.
• 0.30 32.

Maintenance of thePEX ratchet manual bender:

• To extend the life of the bending machine, place the machine in the appropriate box after the work has finished.
• If you do not use the plastic tube bender, replace the jaws and place them inside the box.
• Do not place the rig assembly in the vicinity of the machine, as it will result in faster erosion.

Observing the following points When using a five-layer pipe bender at work, the individual safety and safety of the device are required:

• The work environment is clean and free from any oil and dust. Any abnormalities in the environment will cause problems.
• The electrical bending tube is not an electric insulating tape, so be careful when using.
• Do not use the clamp to hold the machine.
• Avoid opening and disassembling the machine and referring to authorized centers if there is a problem.
• Do not place your hands on the jaws and the strap while working.
• Do not use any device if there is a malfunction or fracture.
• For more information and prices, please contact the sales office.
• ppr pipe cutter such as pipe cutters,pipe cutters, white tube shears, electric pipe cutters polyethylene pipe cutters plumbing cutters, for cutting green and white pipes.
• A green tube welding machine consists of several mouths (green tube caliber) that is performed by bringing the boiling temperature to the boiling point.
• A welding machine with a name of plastic welding machine, a second-line polyethylene welding machine, a fully-welded polyethylene welding machine, a plastic welding machine, a pipe-welded tube and polyethylene fittings of 63 to 160 mm in size.
• Polyethylene welding iron is also capable of welding all polyethylene pipes.
• Polypropylene Polypropylene Tubes are used to cut polyethylene and propylene pipes from 50 to 127 mm in size.
• The Polypropylene Tube Wrench is an industry capable of opening and closing all kinds of polyethylene fittings and PVC fittings.
• pex pipe presses include five-layer, pex pipe presses, pex pipe hydraulic presses.
• Allpex, five-piston tube presses have pex connectors (SuperPyp, UnixPipe, NewPipe).
• The outer layer of the five-layer pipe can be penetrated by a pex pipe.
• The pex pipes can be bent ppr pex pipe, and they are riveted to penetrate the five-layer tubes by pex pipe riveting.
• To bend these types of pipes, the five-layer industrial pipe bender is used.
• To keep the pipe in the shape of a deformation, you can use the roller of the five-layer industrial pipe.
• The rastegar Industrial Pump Test Machine has been designed with a unique design, light weight to test and test the piping of pipelines and reservoirs.
• Rastegar Industrial Company is able to repair the water piping test machine. So you can refer to the office of Rastgar Industry for the repair of the water pipe testing machine.
• Blind copper pipes are used to block copper pipes and aluminum pipes.
• Copper tube bending spring is used to bend copper pipes.
• The robust toothed clamp of the industry has the capability to hold all kinds of metal pipes (steel, steel, galvanized ...).
• The riveting nut tool is used to rivet various types of rivets.
• Hydraulic punch is used to punch all kinds of metal sheets.
• The industrial steamer is used to block all types of pipes and fittings in water and wastewater, oil, gas and petrochemicals.
• The wind turbine has the ability to test the pipe.
• Hand-operated stapler for testing all types of polyurethane, polyethylene and PVC pipes.
• The handpiece is capable of tapping all types of pipe fittings.
• Pipe fitting wrench is used to keep all types of ductile pipes.
• The Rossabor copper tube has the ability to cut all kinds of copper and aluminum pipes.

Information:

RSCo copper and steel bender (medium size):

• Able to bend copper and steel pipes.
• Using size: 12 mm.
• It's manual.
• Having plastic cover anti sweat and anti slip.
• For more info call sales office.