Electric Pipe Threading Machine 2 inch

The components of the threading machine:

• Three sets of system, pipe, die stock, , three systems, locking handle, step adjuster, adjusting handle, shaft, round adjustment knob, body, base, tube handle, switch key, three systems.

How to operate the three-phase electric device:

• The galvanized tube is placed into three systems of electric devices.
• We tighten up the three systems on both sides of the three systems.
• Lower the pipe to the device and place the galvanized tube into the tube and use a tube to tighten the pipe.
• Turn on the device and rotate the three systems.
• Turn the handle of the tube slowly until the pipe is cut off (this step should be done carefully and slowly).
• After cutting the pipe, we return the pipe to the previous place and turn off the machine.
• Let's lower the device and put the tube inside.
• Using the lever, we lock the device. Then select the right gear by using the lever.
• Turn on the device, the three systems start to rotate. And starts the process.
• After the end of the work, turn off the machine and clean the device using a gasoline cleaner and cleaning materials.

.

Observing the following points in individual safety, safety in the work environment and electrical safety of the device is required:

• Keep the environment clean and free from any dust or oil. Any abnormality in the workplace will cause a problem.
• This is not an electric insulator. Please be careful when using.
• Please do not use the device in high pressure and high temperature environments.
• The electric appliance should not be in a humid, damp or adjacent environment.
• After each operation, rinse the main jaw tube and clean the fabrics with a full gasoline and free of any dust.
• Do not use the device during sleepiness.
• Do not use any handheld device if there is a malfunction or fracture.

Read more about other products of the industry:

• ppr Pipe welding is a specially designed plumbing fixtures for green tubing, heat and steel pipe, white iron ironing machines, whitewashing iron, plumbing, plastic welders, ppr pipe welding.
• For more information and prices, please contact the sales office.
• ppr pipe cutter, such as pipe cutters,ppr pipe cutting cutters, electric pipe cutters, polyethylene pipe cutters plumbing cutters, for cutting ppr pipes.
• A green tube welding machine consists of several mouths (green tube caliber) that is performed by bringing the boiling temperature to the boiling point.
• A welding machine with a name of plastic welding machine, a second-line polyethylene welding machine, a fully-welded polyethylene welding machine, a plastic welding machine, a pipe-welded tube and polyethylene fittings of 63 to 160 mm in size.
• Polyethylene welding iron is also capable of welding all polyethylene pipes.
• Polypropylene Polypropylene pipes are used to cut pe and propylene pipes from 50 to 127 mm in size.
• The Polypropylene Tube Wrench is an industry capable of opening and closing all kinds of polyethylene fittings and PVC fittings.
• Five-layer pipe presses include five-layer, five-layer, five-layer, pex pipe presses, five-layer pipe hydraulic presses.
• All pex, five-piston tube presses have five-layer connectors (SuperPyp, UnixPipe, NewPipe).
• The outer layer of the five-layer pipe can be penetrated by a five-layer tube.
• The five-layer pipes can be bent with a five-layer pipe, and they are riveted to penetrate the five-layer tubes by a five-layer pipe riveting.
• To bend these types of pipes, the five-layer industrial pipe bender is used.
• To keep the pipe in the shape of a deformation, you can use the roller of the pex industrial pipe.
• The rastegar Industrial Pump Test Machine has been designed with a unique design, light weight to test and test the piping of pipelines and reservoirs.
• rastegar Industrial Company is able to repair the water piping test machine. So you can refer to the office of Rastgar Industry for the repair of the water pipe testing machine.
• To leak the pressure pipes, we introduce the industry-leading mini-leak detector. The industry has gas leak detectors.
• For repairs of polyethylene welding machines, polyethylene boiling iron, green tube iron, pump testing machine, five-layer pipe presses, welding inverters and leak detectors, please refer to the sales office of the industry.
• Stainless steel extruder is also used to repair pipe and fittings of polyethylene.
• The high-pressure welding extruder of the industry is used as a welding pipe and polyethylene fittings.
• Due to the fact that steel and galvanized pipes are used today, electric devices are used to carry out these types of pipes.
• The industrial scrapper is used to peel polyethylene pipes.
• The squezeer is used to block the transmission of polyethylene pipes
• Cutting of polyethylene pipes from a size of 25-160 mm is done by pipe on guillotine.
• Multi-clamp is also used to hold polyethylene pipes during welding.
• The clamping of polyethylene pipes is used to hold the polyethylene pipes at the welding time.

Information and accessories:

RSCo threading machine (1/2-2"):

• Able to grab all types of galvanized pipes (1/2-2").
• Includes Cast iron unbreakable epoxy body.
• Includes hard full metal gear box.
• Includes water proof switch.
• Includes pipe cutter metal handle.
• Includes steel legs for easiness.
• Includes hydraulic metal case-shot gear boxed.
• This RSCo stock includes CE and ISO9001 standards from Uroupe union.
• For more info call the company.

threading machine,automatic and manual pipe threading machine,pipe threading machine ,electric pipe threading machine,pipe threader threading machine,electric steel pipe threading ,machine,electric pipe threading machin