REMS Reciprocating Saw

Sabre Saw

Information:

• To cut all types of metal, PVC, and HDPE pipes and metal joints
• Fast saw replacement system
• Overload control
• Slow start
• Electronic speed stabilization system
• Speed control ability
• Impact sweep mechanism
• Voltage: 220 - 240 w
• Power: 1500 w
• Speed: 1000-2100 rounds per minute
• Sweep course: 26 mm
• Maximum cutting rate: 203 mm
• Weight: 3.8 Kg
• Contact us for more information

Sabre Saw 

Information:

• It has ability to saw replaceable, overload control, slow start and speed fixative electronic system.
• This has thump round trip mechanism.
• This all purpose saw has 220-240 voltage.
• The power of this, is 1600 w.
• Speed : 1000-2800 round per minute.
• Course of round trip : 26 mm
• Maximum of cut speed in per minute is 130 mm
• Weight : 3.7 kg
• Contact us for more info.

Hinged Pipe Cutter

Information:

• To cut all types of steel pipes, soft steel and aluminum
• 4 all-steel blades
• 360-degree force for cutting by closed frame
• Cutting size: 8 - 12 inch
• Handle is covered by antiperspirant and non-slip plastic
• Long handle for easy work
• Strong all-steel body
• An effective arm that only needs an interval between 90 and 110 degrees to rotate
• Made in China
• Contact us for more info

Tristand pipe vise

Information:

• To hold all types of metallic pipes (steel, galvanized, etc.)
• Size: 3/4 - 2 inch
• Tripod
• Steel folding base
• Strong and hardened steel chain
• Made in Germany
• Contact us for more information

Information:

RSCO Electric Hydraulic Bender

• Ability to bend  metal tube(steel, Galvanized)from(1/2 to 2 inch)in form of hydraulic manual in several angle to (90 degree)
• Bend size :1.2 - 2 inch (20 633 cm )
• Maximum pressure : 13 ton
• Size of jaw : 1.2 / 3.4 / 1 / 1.4 1 / 1.2 1 / 2inch (20 - 25 - 32 - 40 - 50 -63 mm)
• Size of  jaw's surface : 250 mm
• Hydraulic pump 
• cast iron jaws
• Dimension : 96*35*28 cm
• Weight : 66.9 kg
• Steel stands for standing and easy work
• Made from steel
• Power supply: (electricity)
• Made in CHINA
• Resistant plastic box
• Ability to regulation and change hub for change in bend angle
• ISO 9001 & CE

Information:

RSCO Hydraulic pipe bender

• Ability to bending metal tube(steel, Galvanized)from(1/2 to 3inch)in form of hydraulic manual in several angle
• Steel stands for standing and easy work
• Working range : 1/2-3 inches .
• Made of steel ans ductile iron .
• 90 degree Hydraulic pipe bender .
• Jack power pressure : 20 Tons .
• High power jaw in single size
• Resistant plastic box
• Ability to regulation and change hub for change in bend angle
• ISO 9001 & CE
• Weight : 100.5 kg .
• Contact us for more information .

Information:

RSCO Hydraulic pipe bender

• Ability to bending metal tube(steel, Galvanized)from(1/2 to 2 inch)in form of hydraulic manual in several angle
• Steel stands for standing and easy work
• Made from aluminum(7000)
• Bend size : 1.2 - 2 inch
• Bend angle ; 90 degree
• High power jaw in single size
• Resistant plastic box
• Equipped to wheels
• ISO 9001 & CE
• Contact us for more information .

Information:

RSCO manual tube bender

• Bend the metal pipe, steel pipe, stainless steel pipe, wire pipe, circle steel pipe.
• Maximum rotation of bend: (180 degree).
• Bend the pipe without any damage.
• Material: steel.
• Maximum pressure:1000 kg .
• Jaw : 10 , 12 , 14 , 16 , 19 , 22 , 25 mm
• Weight: (25kg).
• Resistant plastic box.
• Function: very fast.
• Contact us for more information.