RSCo Drain cleaner spring PDS24

Introduction of drain cleaner springs :

• This drain cleaner spring is used to open pipes.
• This spring can be carried easily.
• This drain cleaner springs is made of high quality material.
• This is the best way to unclog toilets.
• The action of this device is done by the spring it has to make enough energy so pipes are open.
• These springs can move through any crooked and deep pipes.
• The head of these springs can unclog anything.
• This spring has special features and is made of steel.
• The spring must be flexible and tough .

How to use drain cleaner springs :

• When the clogging is low put the head of spring in the sewage or toilet.
• Then by the handle turn the spring in the pipe.
• To work quicker you can push the spring in the pipe and then pull it out.
• Tips.
• You should not use this spring when the clog is too thick because it will stick in the pipe.
• If the spring is stuck avoid pulling and doing anything useless.

Why is the cleaner spring is better than chemical:

• It is cheaper.
• It does not hurt or make pipe rot.
• This spring is made of steel and can be found in different sizes in the market.

Read more about other products of the industry:

• PPR pipe is a specially designed plumbing fixtures for PPR pipe,ppr and steel pipe, ppr heating whitewashing heating plumbing, plastic welds, and PPR pipe.
• For more information and prices, please contact the sales office.
• PPRpipe cutters such as pipe cutter, pipe cutters, PPR  pipe cutting ppr white tube shears, electric pipe cutter, pe pipe cutter, plumbing cutter, for cuttingppr and pe pipes.
• A ppr pipe welding machine consists of several mouths (green tube caliber) that is performed by bringing the boiling temperature to the boiling point.
• A welding machine with a name of plastic welding machine, a second-line polyethylene welding machine, a fully-welded polyethylene welding machine, a plastic welding machine, a pipe-welded pipe and polyethylene fittings of 63 to 160 mm in size.
• Polyethylene welding iron is also capable of welding all polyethylene pipes.
• PE Polypropylene pipes are used to cut pe and propylene pipes from 50 to 127 mm in size.
• The Polypropylene Tube Wrench is an industry capable of opening and closing all kinds of polyethylene fittings and PVC fittings.
• PEX pipe presses include five-layer, five-layer,pex ,pex pipe presses, pex pipe hydraulic presses.
• All pex, five-piston pipe presses have pex connectors (SuperPyp, UnixPipe, NewPipe).
• The outer layer of the five-layer pipe can be penetrated by apex pipe.
• The five-layer pipes can be bent with a five-layer pipe, and they are riveted to penetrate the five-layer tubes by a five-layer pipe riveting.
• To bend these types of pipes, thepex industrial pipe bender is used.
• To keep the pipe in the shape of a deformation, you can use the roller of the five-layer industrial pipe.
• The Industrial Pump Test Machine has been designed with a unique design, light weight to test and test the piping of pipelines and reservoirs.
• rastegar Industrial Company is able to repair the water piping test machine. So you can refer to the office of Rastgar Industry for the repair of the water pipe testing machine
• To leak the pressure pipes, we introduce the industry-leading mini-leak detector. The industry has gas leak detectors.
• For repairs of polyethylene welding machines, polyethylene boiling heater , ppr pipe iron, pump testing machine, pex pipe presses, welding inverters and leak detectors, please refer to the sales office of the industry.
• Stainless steel extruder is also used to repair pipe and fittings of polyethylene.
• The high-pressure welding extruder of the industry is used as a welding pipe and polyethylene fittings.
• Due to the fact that steel and galvanized pipes are used today, electric devices are used to carry out these types of pipes.
• The industrial scrapper is used to peel pe pipes.
• The squzeer is used to block the transmission of polyethylene pipes.
• Cutting of polyethylene pipes from a size of 25-160 mm is done by pipe on guillotine.
• Multi-clamp is also used to hold polyethylene pipes during welding.
• The clamping of polyethylene pipes is used to hold the polyethylene pipes at the welding time.
• Welding Industry has the ability to weld various types of plastic surfaces in PVC, PP, polyethylene.
• The Rossabor copper tube has the ability to cut all kinds of copper and aluminum pipes. And Ripper is a steel wire mesh made of high alloy steel.
• Hydraulic bender The five-layer industrial pipe is used to bend all kinds of steel, steel, copper and aluminum pipes.
• Hydraulic polisher is used to get all kinds of industrial money.
• The hand pump is used for winding up to a maximum of 1.9 times.