RSCO manual pipe expander ME16-32

How to work the copper tube expander:

•   This hydraulic expander is used for copper, aluminum, titanium, soft steel and so on.
•   The three systems will cut the pipe size to the expander, placing the tube inside the three-slope of the system.
•   Then, using the mobile buckle of the pipe expander, we start to pump and cause the tube to loosen.
•   Get rid of the installer by pressing the manual expander, and the three systems are free and the pipe can be pulled out.

Maintenance of Expanded Copper Tube:

• The service of the machine must be performed by an authorized service.

Observing the following points when using the expander machine in the work environment and individual safety is required:

•   The work environment is clean and free from any oil and dust. Any abnormalities in the environment will cause problems.
•   Expander is not an electrical insulating copper tube. Please be careful when using.
•   Avoid opening and disassembling the machine and referring to authorized centers if there is a problem.
•   If there is no damage or fracture, do not use any Extender device.

Additional Information rastegar:

•  PPR pipe cutter such as pipe cutters,pipe cutters,  white tube shears, electric pipe cutters polyethylene pipe cutters plumbing cutters, for cutting green and white pipes.
•  A green tube welding machine consists of several mouths (green tube caliber) that is performed by bringing the boiling temperature to the boiling point.
•  A welding machine with a name of plastic welding machine, a second-line polyethylene welding machine, a fully-welded polyethylene welding machine, a plastic welding machine, a pipe-welded tube and polyethylene fittings of 63 to 160 mm in size.
•  Polyethylene welding iron is also capable of welding all polyethylene pipes.
• Polypropylene Polypropylene Tubes are used to cut polyethylene and propylene pipes from 50 to 127 mm in size.
•  The Polypropylene Tube Wrench is an industry capable of opening and closing all kinds of polyethylene fittings and PVC fittings.
•  pex  pipe presses include five-layer, pex pipe presses, pex pipe hydraulic presses.
•  Allpex, five-piston tube presses have pex connectors (SuperPyp, UnixPipe, NewPipe).
•  The outer layer of the five-layer pipe can be penetrated by a pex pipe.
• The pex pipes can be bent ppr pex pipe, and they are riveted to penetrate the five-layer tubes by pex pipe riveting.
•  To bend these types of pipes, the five-layer industrial pipe bender is used.
•  To keep the pipe in the shape of a deformation, you can use the roller of the five-layer industrial pipe.
•  The rastegar Industrial Pump Test Machine has been designed with a unique design, light weight to test and test the piping of pipelines and reservoirs.
•   Rastegar Industrial Company is able to repair the water piping test machine. So you can refer to the office of Rastgar Industry for the repair of the water pipe testing machine.
• Blind copper pipes are used to block copper pipes and aluminum pipes.
•  Copper tube bending spring is used to bend copper pipes.
•  The robust toothed clamp of the industry has the capability to hold all kinds of metal pipes (steel, steel, galvanized ...).
•  The riveting nut tool is used to rivet various types of rivets.
•  Hydraulic punch is used to punch all kinds of metal sheets.
•  The industrial steamer is used to block all types of pipes and fittings in water and wastewater, oil, gas and petrochemicals.
•  The wind turbine has the ability to test the pipe.
•  Hand-operated stapler for testing all types of polyurethane, polyethylene and PVC pipes.
•  The handpiece is capable of tapping all types of pipe fittings.
• Pipe fitting wrench is used to keep all types of ductile pipes.
•  The Rossabor copper tube has the ability to cut all kinds of copper and aluminum pipes.

Information:

Manual expander:

• Expand the copper, aluminum, titanium, soft steel.
• Size: (16-32mm).
• Handle material: steel.
• Plastic cover of handle.
• Anti slip handle.
• Weight: (3.5kg).
• Resistant plastic box.
• ISO 9001 & CE.