copy of Letter And Number Punch

Turning chuck

Information:

• This Turning chuck is used for small objects .
• This tool is made in 3 parts.
• Working range of this Turning chuck is 0.6 , 0.7 , 0.8 , 1 mm.
• Working system : manual.
• Including 1 heads which each include 1 lid1 .
• In four type with different sizes .
• To work with this Turning chuck you should close the mill and turn the body to drill the object.
• It does not need engine or drill to make holes.
• Weight : 0.1 kg
• Made with high quality .
• Contact us for more information.

Turning chuck

Information:

• This Turning chuck is used for small objects .
• Working range of this Turning chuck is 0.1 up to 4 mm.
• Working system : manual.
• Including 1 heads which each include 1 lid1 .
• In four type with different sizes .
• To work with this Turning chuck you should close the mill and turn the body to drill the object.
• It does not need engine or drill to make holes.
• Made with high quality .
• Contact us for more information.

Automatic turning chuck

Information:

• There is a part in drill which is called turning chuck and drill bit is installed on it.
• turning chuck is used in mi8lling to close round and multi angle shapes on it .
• dented parts on the turning chuck is called jaw .
• jaws are connected to the part to hold the part still on the milling device .
• turning chuck is in automatic and manual model.
• This device is automatic .
• It does not need wrench to be opened or closed.
• This turning chuck is made of iron .
• With plastic or iron cover .
• Made in China.
• Contact us for more information.

 Dead Center Miling

 Information :

• Center Morse tool
• We use Center Morse tool in milling to mark the point we want to drill.
• Made of HSS steel
• Made with high quality and resistant
• Made3 with different diameters and shapes .
• It is made based on inch or mm on the length which can distract the man place using a screw .
• It can be stable on the wanted point for milling.
• Center Morse tool is an empty tool with the shape of cone.
• Contact us for more information .

Letter And Number Punch

Information:

• This tool is used for making lines and shapes on the metal .
• Working system of this tool is automatic and is used to make signs in metal .
• Depth of curve on the head can be set .
• By turning the hat of handle makes small curves with low depth .
• If you set the hat stable it can give you a similar depth in the operation.
• Shape of head : pointy and sharp.
• Practical use for marking before drilling .
• Contact us for more information .

Letter And Number Punch

Information:

• This tool is used for making lines and shapes on the metal .
• Working system of this tool is automatic and is used to make signs in metal .
• Depth of curve on the head can be set .
• By turning the hat of handle makes small curves with low depth .
• If you set the hat stable it can give you a similar depth in the operation.
• Shape of head : pointy and sharp.
• Practical use for marking before drilling .
• Contact us for more information .

Letter And Number Punch

Information:

• This tool is used for making lines and shapes on the metal .
• Working system of this tool is automatic and is used to make signs in metal .
• Depth of curve on the head can be set .
• By turning the hat of handle makes small curves with low depth .
• If you set the hat stable it can give you a similar depth in the operation.
• Shape of head : pointy and sharp.
• Practical use for marking before drilling .
• Contact us for more information .

Morse Taper Adaptor

Information :

• This drill hat is made with high precision .
• Outer and inner part of this device is hardened .
• Suitable for drill bits in 5 to 14 mm .
• High quality and high resistant .
• This is an inverter device in turning .
• Made in Switzerland .
• Contact us for more information .