Hydraulic Cable Cutter Jaw

Introduce hydraulic cable cutter:

• Cable cutters are available according to the conditions and the pressure or cable used in various types: cable CUTTERS on hand, cablecutters, and cable cutters on a hydraulic cable.
• The cable cutters on the handheld are capable of cutting all kinds of copper, aluminum and ... cables of different sizes.

Cable scissors components on hydraulics:

• Movable jaw
• Fixed jaw
• The blade
• screw
• Pin (movable jaw locking)
• Handle (to keep at heights)
• Connector
• Connector door
• Hydraulic Pump Hose
• Springs
• hydraulic pump
• Screw screw
• Hydraulic pump handle
• Screw the oil into the tank

To use the hydraulic cable, you can do the following:

• Due to the size of the cable and the amount of pressure available for cable cutting, it is important to know which cable (cable, hand cable, cable for hydraulic and cable for charging).

The following can be considered for the use of hydraulic cable:

• This cable has a cutting capacity of up to 4/4 "in diameter.
• First we open the cable connector on the hydraulic and hydraulic pump.
• Connect the hydraulic pump hose to the hydraulic cable connector. (Make sure the correct hose connection to the cable connector is on the hydraulic).
• Moving jaw pin to the hydraulic cable and open the movable jaw.
• Place the cable between the cable jaws and close the cable jaw again.
• After putting the cable, we begin to pump using the hydraulic pump handle (do not refuse to do this fast).
• After moving the handle, the cable blade starts to move and moves forward (move it somewhere to cut the cable).
• After cutting, open the bolt of the hydraulic pump, which will cause the cable bat to return to its place.

Check the harness for the power cable equipment by:

• Power cable equipment including cable scissors and hydraulic cable presses.
• Cable cutters on handhelds include large cable scissors, cable scissors on average, cable scissors on small handles.
• Cable cutters are used to cut all kinds of copper and aluminum cables.
• Cable cutters are used for hydraulic cutting of copper, aluminum and copper cables.
• The cable cutters have the ability to press copper and aluminum cables.
• The hydraulic cable press also features a variety of copper and aluminum cables.

Read more about other products of the industry:

• PPR Pipe welding is a specially designed plumbing fixtures for green tubing, heat and steel pipe, white iron ironing machines, whitewashing iron, plumbing, plastic welders, ppr pipe welding.
• For more information and prices, please contact the sales office.
• ppr pipe cutter, such as pipe cutters,ppr pipe cutting cutters, electric pipe cutters, polyethylene pipe cutters plumbing cutters, for cutting ppr pipes.
• A green tube welding machine consists of several mouths (green tube caliber) that is performed by bringing the boiling temperature to the boiling point.
• A welding machine with a name of plastic welding machine, a second-line polyethylene welding machine, a fully-welded polyethylene welding machine, a plastic welding machine, a pipe-welded tube and polyethylene fittings of 63 to 160 mm in size.
• Polyethylene welding iron is also capable of welding all polyethylene pipes.
• Polypropylene Polypropylene pipes are used to cut pe and propylene pipes from 50 to 127 mm in size.
• The Polypropylene Tube Wrench is an industry capable of opening and closing all kinds of polyethylene fittings and PVC fittings.
• Five-layer pipe presses include five-layer, five-layer, five-layer, pex pipe presses, five-layer pipe hydraulic presses.
• All pex, five-piston tube presses have five-layer connectors (SuperPyp, UnixPipe, NewPipe).
• The outer layer of the five-layer pipe can be penetrated by a five-layer tube.
• The five-layer pipes can be bent with a five-layer pipe, and they are riveted to penetrate the five-layer tubes by a five-layer pipe riveting.
• To bend these types of pipes, the five-layer industrial pipe bender is used.
• To keep the pipe in the shape of a deformation, you can use the roller of the pex industrial pipe.
• The rastegar Industrial Pump Test Machine has been designed with a unique design, light weight to test and test the piping of pipelines and reservoirs.
• rastegar Industrial Company is able to repair the water piping test machine. So you can refer to the office of Rastgar Industry for the repair of the water pipe testing machine.
• To leak the pressure pipes, we introduce the industry-leading mini-leak detector. The industry has gas leak detectors.
• For repairs of polyethylene welding machines, polyethylene boiling iron, green tube iron, pump testing machine, five-layer pipe presses, welding inverters and leak detectors, please refer to the sales office of the industry.
• Stainless steel extruder is also used to repair pipe and fittings of polyethylene.
• The high-pressure welding extruder of the industry is used as a welding pipe and polyethylene fittings.
• Due to the fact that steel and galvanized pipes are used today, electric devices are used to carry out these types of pipes.
• The industrial scrapper is used to peel polyethylene pipes.
• The squezeer is used to block the transmission of polyethylene pipes
• Cutting of polyethylene pipes from a size of 25-160 mm is done by pipe on guillotine.
• Multi-clamp is also used to hold polyethylene pipes during welding.
• The clamping of polyethylene pipes is used to hold the polyethylene pipes at the welding time.

Information :

Hydraulic cable cutter

• Cut aluminum ,copper,phone cable
• Special steel blade with high strength
• Head blade with rotation 360 degree.
• Ability of cutting: (10 tons)
• Hydraulic Power supply
• Low weight
• Suitable for thin and thick wire
• Ability of installation on pomp
• Ergonomic design
• Weight:(9.6 kg)
• ISO 9001 & CE