RSCO Gasoline Generator
Information :
Gasoline Generator is used to provide electricity
power : 1200 w
voltage : 100, 120, 220,230, 240 volt
Maximum output : 1.1 kW
Maximum output at 1.4 kW : 5000 rpm
Fuel tank...
RSCO Steel Cutting Disc
Information:
Ability to install on mini milling and milling machines and used for cutting and grinding
Two chips up and down to prevent the disc from slipping
Ability to cut stainless steel...
RSCo Electrofusion Coupler
Information:
To connect electrofusion pipes
Size: 250 mm
Used for water and gas pipes
Made of polyethylene
Working temperature: -10 to +45 C
Max working pressure: 24 bar
Made in Iran...
Three cup suction
Information:
A tool suitable for moving and transferring objects such as glass, tile, metal, ceramic, stone, etc.
in triplets
The body is made of durable aluminum
Equipped with a plastic pad to...
RSCo Pipe plug
Information:
For testing all kinds of HDPE, Metal and, PVC pipes
Size: 63 mm (2 inch)
Double rubber
Ability to withstand high pressure
Made of iron and aluminum body
An end nut to close and open the...
Information:
RSCO drain cleaner spring :
Several meter and diameter.
Length : 20 m
Diameter : 20 mm
Use for most pipe opener machine.
Operation system : electrical
High quality made.
RSCO Bench Lathe
Specifications:
A bench lathe machine is a versatile and essential tool in the field of precision machining
Swing over bed: 460 mm
Swing over cross slide: 274 mm
Swing over gap: 690 mm
length of...
RSCO PPR pipe peeling
Information:
We use pipe peeling to scrap the Aluminum cover from the PPR pipe.
With two scrapper edges and two sides ( 50-63 mm ).
Able to set based on size and pipe layer.
Able to scrap each...
Electric Rebar cutter
information :
Electric Rebar cutter Cutting size: 4-20 mm
voltage 220 volts
Power: 900 / 830 watts
portable
Ability to install on the table
Blade made of steel
Cutting speed 3 to 3.5 seconds...
RSCO manual PE pipe welding machine
Information:
Welding altogether PE pipes in water supply lattices in sizes: 63 - 160 mm
Manual or electric scraper with SPK hardened steel blades
2000 W electric heater
A Toolbox...
Electric Rebar bender
information
Electric Rebar bender Cutting size: 4-16 mm
voltage 110/220 volts
Bend size: 4 - 16 mm
Power: 750 / 800 watts
portable
Bendable angle: 0-130 degrees
It has a fast cutting speed in...
RSCO Metal Cutting Disc
Information:
Can be installed on milling machine and used for cutting
Two chips up and down to prevent the disc from slipping
Max round: 8500 rounds per minute
Max speed: 80 meters per second...
Ball bearing pipe cutter blade
Information:
We use this tool for different types of metal pipes .
This tool is made if steel.
Made by percision and with forging gram technics.
This pipe cutter part is Galvanized ....
RSCo metal calibrator
Information:
This calibrator is used for calibrating (measuring) all kinds of PEX pipes.
Size: 32 mm.
These PEX calibrators are made of iron.
The handle of this PEX pipe calibrator has...
RSCO Gasoline Hydraulic Pump
Information:
To convert mechanical power supplied by internal combustion or by electric motors to hydraulic power
Power: 5.5 KW
Working pressure: 20-700 bar
Source power: gasoline
Flow...
