Vulcanizing Machine
Information :
We use Vulcanizing Machine to repair tilted tires and tubes .
Working Voltage : 220 V .
Able to work with different kinds of tubes .
Equipped with powerful pneumatic jack .
Working...
Orbital jigsaw
Information :
Orbital jigsaw is a practical tool which is used to cut metal and wood in curve and straight type.
Speed without load : 2500 -3000 round per minute.
Power: 750 w
Voltage : 220 v...
tapping machine
Information :
power 600w AC
Working voltage 220/110 V , 50HZ
Max work radius 1100 mm
Tapping range : M3 - M12
highest speed 625rmp
mist spraying time 0.1-25s Adjustable
tapping direction : Universal...
DCA Angle Grinder
Information :
Angle grinder is a practical tool , We use Angle Grinder to cut stone , tile , plastic , metal ,....
Equipped to locking switch on the handle
It has guard frame
Equipped to metal gear...
Electric Rebar bender
information :
Electric Rebar bender Cutting size: 4-25 mm
voltage 110/220 volts
Power: 950 / 1350 watts
Bending speed: 5-8 seconds
portable
It has a fast cutting speed in the shortest time...
Cable Threading Machine Rope
Information:
Used in cable threading machine
Length about 800-1100
Tensile strength: up to 22 kg
Used in wiring and to handle hanging wires
Compatible with NFS-100 and NFS-1800
10 pieces...
Electric screwdriver
Information :
Electric screwdriver is able to open and close many screws in a short period of time.
Equipped with LED light , to light up the screw area while working in dark place
Equipped with...
Electrical test pump
Information:
For testing pipe lines and low-pressure tanks
pump pressure: 60 Bar
Electrical function
Voltage: (220v)
Work speed: (9/2 RPM)
Tank capacity: (18L)
Exit connect port: (1/2 in)
Easy...
4-Unit Battery Charger
Information :
This battery charger is designed for charging vehicle batteries with advanced functionality and robust performance.
Key Features:
Charging Voltage Range: 12-24V
Capable of...
Sanding Machine Sheet Sander
Information :
Sanding Machine Sheet Sander is so practical which is used for painting to remove scratches on wood.
Speed without load : 1500-2800 round per minute .
Power : 1200 W...
Vacuum Pump
Information:
We use this pump to make void in specific system.
Flow range : 241 L per minutes .
Maximum working range : 1_10*2 Pa.
Tank capacity: 550 ml.
Input port : 3/8 , 1/4 inch
Working system of this...
Inverter Plasma Machine
Information:
To cut steel or other metals (sometimes some other materials) in different diameters using a torch
Maximum cutting thickness: 30 mm
Output current range: 20-120 amp
Output...
RSCo electric pex pipe crimping tool
Information:
The ability to press all PEX attachments from of 16 - 90 mm
Working rate: up to 7 tonnes
Single steel jaws in sizes: 16, 20, 25 , 32 mm
Hydraulic automatic...
Orbital jigsaw
Information :
Orbital jigsaw is a practical tool which is used to cut metal and wood in curve and straight type.
Speed without load : 700 - 3000 round per minute.
Power: 20 w
Powerful engine with...
Circular saw
Information :
Circular saw is a very practical tool in carpentry and can cut length and width and to make curve.
Speed without load : 4200 round per minute
Power : 1400 w
Ability to adjust the angle : 0...
electric Impact Wrench
Information :
Electric Impact Wrench is used is used to open and close screws and nuts in a shot period of time .
Maximum speed : 0_1700 round per minute .
Max torque : 520 N/M .
Power : 725 W...
Bench Grinder
Information :
Desk grinder is practical tool which is used for cutting stone , plastic , tile , metal . etc ...
Suitable for metal and stone
Speed in free mode : 2000 rpm
Power : 2000 w
Thickness of...
Paint spray
Information :
Electric paint spray is a new technology to pain different surface.
Power : 400 W
With ability to adjust the direction of spray
It has 3 models for paint spray
Nozzle size : 0.8 mm
Max...
