Industrial ladder
Information:
A ladder is two long vertical pieces of wood or metal, between which horizontal pieces of wood or metal are placed at a certain distance, and can be used to climb a wall, tree, etc.
as...
Groz Oil Suction Gun
Information :
We use Oil Suction Gun to suck oil , gas and car oil .
Able to discharge 5-20 mL in every lever pressure .
Including anti slip and anti sweat plastic cover handle .
Made of high...
Hammer drill
Information :
This electric hammer drill is used to pierce concrete and wall.
Speed without load : 0 - 2700 round per minute.
Power : 750 w
Frequency : 60 Hz
Thickness of drilling in metal , concrete ,...
Tool Set
Informaton :
This perfect tool set is suitable for repair , electric operation .
Material : Chromium Vanadium .
Tool set standard : metric .
21 pcs Box end wrench :...
End mill cutter
Information:
We use End mill cutter to grate curves and holes and similar operations.
Made with high quality .
Edge of this End mill cutter is made direct and spiral.
In different models.
Made in...
RSCO manual PE pipe welding machine
Information:
The ability to weld PE pipes and fittings of sizes: 63-200 mm
Manual or electric gearbox scraper with SPK hardened steel blades
Dynamic system : manual
Equipped to...
Bench Grinder
Information :
Desk grinder is practical tool which is used for cutting stone , plastic , tile , metal . etc ...
Speed : 2900 rpm
Working power : 350 W
Working Voltage : 220 V
Thickness of plate : 150...
Orbital jigsaw
Information :
Orbital jigsaw is a practical tool which is used to cut metal and wood in curve and straight type.
Speed without load : 700 -3000 round per minute.
Power: 650 w
Dimension : 245*90*330...
Gasoline Lawn Mower
Information:
Used for cutting, trimming and mowing lawns
Power supply: two 58V lithium ion batteries
With the ability to adjust the speed in four levels
With a cup holder
The volume of the grass...
Crane rail
Information:
Crane rails are used in places where the number of times of movement and loading is low.
Bearing capacity: 1 ton
Voltage: 230 volts
Power: 540 watts
Adjustable rail width: 80 to 102 mm
Minimum...
Threading tool machine
Information :
Light device which can be so precisely controlled .
Unique design and can control the power in low speed .
Equipped with electronic over load control which can be stopped at the...
Chuck follower
Information :
This Chuck follower is made of hardened steel .
This Chuck follower is a connector between the milling tools and turning chuck.
Suitable for rechargeable screw driver , drill and drill...
Automatic turning chuck
Information:
There is a part in drill which is called turning chuck and drill bit is installed on it.
turning chuck is used in mi8lling to close round and multi angle shapes on it .
dented...
Miling blade
Information:
This Form Miling blade is made of diamond
Made with high resistant .
We use this Form cutter milling for expensive stones .
Pressure and strike resistant .
Made with high quality .
Contact...
RSCO Allen Wrench
Information:
It is an L-shaped hexagonal device used to loosen and tighten Allen screws
Ideal for confined and inaccessible spaces
Size: 6 mm
Made of high strength Steel
Combination of steel...
RSCO Allen Wrench
Information:
It is an L-shaped hexagonal device used to loosen and tighten Allen screws
Ideal for confined and inaccessible spaces
Size: 3 mm
Made of high strength Steel
Suitable for hexagon screws...
T-Handle Allen wrench
Information:
It is a T-shaped hexagonal device used to loosen and tighten Allen screws
Body material: chromium - vanadium
Size: 4 mm
Body with high hardness and resistant to corrosion and...
