Detector Holiday
Information:
The Holiday test device is used to test the insulation of pipes and metal joints.
The measurement range is 0.5 to 35 kV for porosity up to 25mm thickness
The ability to determine and...
Chain Pipe Wrench
Information:
To hold, open, and close all types of steel, metallic, iron and galvanized pipes and joints
Alloyed-steel body
Chain length: 345.5 mm
Size: 4 inch
Ability to open according to the size...
Tristand pipe vise
Information:
To hold all types of metallic pipes (steel, galvanized, etc.)
Size: 2 inch
Tripod
Made of steel
Hardened steel jaws
Made in U.S.A
Contact us for more information
Vacuum Pump
Information:
We use this pump to make void in specific system.
Working system of this device is electrical.
When the device pressure gets lower than 0.77 bar , alarm starts warning.
A light and small...
Clamp Multimeter
Information:
We use Clamp amperemeter to measure direct current,alternative current , direct Voltage and alternative voltage.
Working range: 1000 V.
Maximum working temperature 40°.
With outstanding...
Modular Crimping Tool
Information:
Able to cut wires and network cables
Series made of high strength carbon steel
Total length : 240 mm
Includes anti sweat and anti slip plastic handles
Working system: manual...
Protractor
Information:
Protractor is used to measure the angle of a slope, height or length of an object.
Measuring range: 0 to 360 degrees
Accuracy: ±5 inches
Manual operation system
Equipped with a magnifying...
ACCUD Feeler Gauge
Information:
We use Filler gauge measure to measure and control dimensions.
It has 30 measuring blades.
Made of stainless steel.
Working system : manual
Size on each blade in mm.
Made with high...
Pneumatic Wrench Gun
Information:
To open and close a variety of high-strength bolts
Drive size: 1/2 inch
Torque range: 1100 NM
Suitable for professional garages
Hose size: 10 mm
Working pressure: 6.3
Workshop and...
Air Filter Regulator
Information:
To reduce the level of humidity in the air
Operating temperature: 5-60 C
Air inlet size: 1/2 inch
Automated lubrication
Available in single and twin models
Professional pressure...
Two cup suction lifter
Information:
It is used to move objects such as glass, tile, metal, ceramic, stone, etc.
Suitable for lifting and moving smooth and polished surfaces such as glass
as twins
The body is made of...
Towing Wire
Information:
The tow wire is used to move and transfer the load.
Can be used in various industries including elevator, oil, gas and petrochemical, drilling, mining and machinery industries.
Fabric S+FC...
Industrial balancer
Information:
The balancer is used to suspend the tool and reduce weight during work.
Capacity: 60-70 kg
It is suitable for suspending electric devices, pneumatic tools and machines.
Total workable...
Pressure Regulator
Information:
Used to measure pressure and generally measures the pressure of a gas trapped in a container
Suitable for argon and co2 gas
Working pressure: up to 315 bar
Ability to install quickly...
Iron Electrode
Information:
Used to generate electricity to perform welding steps
Material: iron
Diameter: 1/8 inch
Length: 14 inch
The veneer is often made of lime, cellulose, sodium oxide, clay or asbestos...
OMPI Digital Flow meter
Information :
We use Flow meter to count the liter depending on concentration of liquid.
Accuracy: +/- 1%
Flow rate: 1-30 lit/min
Working pressure: 100 bar
Working temperature: 0-50 °C
Power:...
Hydraulic Puller
Information:
To dismount pulleys and bearings in industrial activities
Withdrawal force: 10 tons
Maximum opening of the jaws: 250 mm
Maximum working height: 170 mm
Easy installation to air...
Hydraulic Torque Wrench
Information:
To apply torque to a joint to close or unscrew bolts and nuts (high power) using hydraulics
Size: 65-115 mm
Manual and hydraulic operation system
Torque: 15804 NM
Total length:...
Folding Allen wrench Set
Information:
It is an L-shaped hexagonal device used to loosen and tighten Allen screws
7 wrenches without holes of different sizes
Size: 10، 2.5، 3، 4، 5، 6، 8 inch
Made of high strength...
