Hydraulic Rebar Cutter
Information:
To cut rebar in different sizes
Cutting size: 4-20 mm
Manual and hydraulic operation system
The handle has an antiperspirant and non-slip plastic cover for comfort
Steel blade
oil...
Turning Machine
Specifications:
This machine has the ability to perform turning, milling and drilling or drilling with small and medium sizes.
Suitable for turning all kinds of metal and plastic surfaces and......
RSCO Nail and Powder
Information :
Nail and powder is suitable for used in nail gun .
the length : 32 mm
The diameter of the powder : 3 mm
Body Material : steel
It has a thick washer with a diameter of 2 mm
Can be...
Gasoline Generator
Information :
Gasoline Generator is used to provide electricity
Equipped to cooling system
Power: 3000 w , 3.6 HP
Oil tank : 0.6 L , current : 8.3 A
Single cylinder
Engine volume : 212 cc
Two...
Vacuum Pump
Information:
We use this pump to make void in specific system.
Voltage :220 V.
Frequency : 50 - 60 HZ.
Flow rate on frequency 50 : 42 liter/min
Flow rate on frequency 60 : 50liter / min
Partial pressure :...
Hydraulic Hose Crimper
Information:
Suitable for pressing all kinds of hydraulic hoses.
Power: 200 tons
Maximum Crimping Diameter: 10-87 mm
Maximum Opening: +33 mm
Maximum Opening without die : 132 mm
Master die...
Inverter Plasma Machine
Information:
To cut steel or other metals (sometimes some other materials) in different diameters using a torch
Ability to cut all kinds of metals, including coated sheets, mild steel,...
Angle Grinder
Information :
We use Angle Grinder to cut stone , tile , plastic , metal , ....
Equipped to protector disc
It has resistance against of dust for protect engine
power : 1900 W
Accessories : manuals
Speed...
Pneumatic Wrench Gun
Information:
To open and close a variety of high-strength bolts
Max pressure: psi 90
Max torque: 1085 NM
Speed in idle mode: 7000 rpm
Torque control mechanism
Speed control mechanism
Weight: 2.9...
Iron file
Information :
A file is used to soften, sharpen, smooth and clean the surfaces of almost all materials.
Please select the degree of wear and length of the file from the table of degree of wear and length....
Pneumatic Sander Machine
Information:
For polishing and sanding wooden, plastic, metal and etc.
Pneumatic operating system
Power : 210 W
Equipped to special gripe for prevent of vibration
It has tanker for collect...
Gasoline Tree Saw
Information:
Used for cutting trees, pruning trees or preparing firewood
Source power: gasoline
Engine power: 1800 w
Oil capacity: 260 mL
Oil to fuel ratio: 1:40
Fuel capacity: 520 mL
Maximum speed:...
Pneumatic Air Gun
Information:
To transfer air from the compressor and to inflate parts
Body made of plastic
Air inlet size : 1.4 inch
Nozzle size : 12 cm
Nozzle diameter : 8 mm
Input pressure : 15 bar
Nozzle made of...
Air Nail Gun
Information:
Can be used for wooden pallets, ceiling sconces, wooden wall sconces and floor coverings, sofa upholstery, etc. due to its high strength
Magazine capacity: 100
It has high beat power...
Electric screwdriver
Information :
Electric screwdriver is able to open and close many screws in a short period of time.
Equipped with LED light , to light up the screw area while working in dark place
Equipped with...
Fire extinguisher
Information:
This fire extinguisher is one of the portable fire extinguishers.
Capsule thickness : 5 mm
Environment temperature 22-16 C .
With cylinder on the body
Made of low carbon steel...
Rems rechargeable mini gun press
Information:
The ability to press all PEX attachments from size 16 - 32 mm.
This RSCo crimping tool includes single steel jaws in sizes: 16, 20, 25, 32 mm.
The pressable weight: up...
Flat Chisel
Information:
Used for marking or wedge
Made of forged steel
Hexagonal shape
Size: 20 cm
Weight: 280 g
Made in Iran
Contact us for more information
Chisel
Information:
Used in carpentry, woodcarving, art, etc. for carving and scrapping wood
Handle with antiperspirant and non-slip plastic cover for easy operation
Size: 6 mm
Metal part at the end of the handle to...
