Marble cutter
Information :
We use marble cutter to cut concrete , building material and stone .
Speed without load : 9000 rpm .
Engine power : 1320 W .
Sheet diameter : 125 mm.
Blade type : steel
Cutting depth : 8...
Osram German test light
Information:
This tool is used to find the elecrical Voltage
This test light is made of Chromium-molybdenum alloy steel.
Suitable for 220 V electricity.
Its working system is manual.
Size :150...
RSCo PE pipe strap wrench
Information:
Able to open and close all kinds of joints of PP, push-fit, and PVC
Able to hold PE pipes and joints
Plastic strap for easy working
Strap length: 11 inch
Size of holding pipe: 5...
RSCO Inverter Welding
Information:
To weld all types of iron, galvanized, steel, carbon steel, cast iron, etc. (acidic and alkaline environments)
Working current: 20-300 amp
6 capacitors with IGBT-MOS-CC-RC...
Double Acting Roller for Conveyor Belt Repair
Information:
Can be used to connect the conveyor belt between the welding board
It has two steel rollers
Total length: 80 cm
It has two back and top handles for ease of...
Welding Electrode Dryer
Information:
To dehumidify and dry the electrode before welding
Capacity: 70 kg
300 degrees
Power: 1500 w
Input voltage: 220 v
Equipped with electrical circuit
Resistant to electric shock due...
Magnetic drill
Information :
Magnetic drill is able to pierce in high speed , hard and precise operation .
Able to drilling sheets up to 30 mm thickness
Suitable for work at heights and places that are hard to...
HDPE Welding Electrode
Information:
Used for welding all kinds of HDPE surfaces
External diameter: 3 mm
Approximate weight of each roll: 5 kg
Made in Iran
Designed by Rastegar Sanat Company
Weight: 1 kg
Contact us...
Allen Wrench
Information:
It is an L-shaped hexagonal device used to loosen and tighten Allen screws
Ideal for confined and inaccessible spaces
Size: 11 mm
Made of high strength chromium and vanadium
Suitable for...
Industrial balancer
Information:
The balancer is used to suspend the tool and reduce weight during work.
Capacity: 5-9 kg
Chain diameter: 4 mm
Very easy to set up and fix
High build quality
Manual operation system...
pressure gauge
Information:
A hand gauge is used to measure the amount of pressure on the surface compared to the cross section.
Bottom connection type / connection from the back
Plate diameter: 6 cm
Measurable...
Hole Saw Drill Alloy
Information :
Hole Saw Drill Alloy includes notch for a clean cut.
Able to work with wood , particle board , MDF etc....
Made of high resistant steel.
Equipped with Tungsten carbide for regular...
RSCO Electric Water Pump
Information :
Water pump is used to increase water pressure in pipes and small water supply networks.
Power : 0.37 KW
Max discharge : 30 L/min
Max height : 30 m
Max speed : 2850 rpm
Voltage :...
Pedal Spot Welding Machine
Information:
One of the types of resistance welding and used for welding sheets
Suitable for welding all types of metals up to 3x3 mm thick
Output power: 30 kW
Ability to weld all types of...
Bench Grinder
Information :
Bench grinder is practical tool which is used for cutting stone , plastic , tile , metal . etc ...
Speed in free mode : 3000 round per minute
Power : 200 w
Thickness of sheet : 125 mm...
Demolition drill hammer
Information :
This demolition drill hammer is used to destroy concrete and wall and asphalt .
Power : 1050 w
Strike quantity : 3000 strikes per minute.
Strike power :12 Joule
Ergonomic and...
Sanding Machine Sheet Sander
Information :
Sanding Machine Sheet Sander is so practical which is used for painting to remove scratches on wood.
Speed without load : 1450 round per minute .
Power : 375 W
Dimension :...
miter saw
Information :
Miter saw is suitable for carpentry to cut wood .
Speed without load : 5500 round per minute.
Power : 1100 W
Blade diameter : 210 mm
Working Voltage : 230
Ability to adjust the degree of...
