Click for more products.
No products were found.
×

RSCo Holiday tester model HD-105A

RSCo Holiday tester

Information:

  • The Holiday test device is used to test the insulation of pipes and metal joints.
  • Inspection range : 1 to 50 KV
  • Thickness range : 0.1 to 35 mm
  • Input voltage : AC 100-240V
  • Output voltage : 12.6 volts 1 amp
  • Three-digit voltage display
  • Accuracy: ±(0.1KV+3%)
  • Dimensions : 240x165x85 mm
  • Anti-jamming
  • Duration of operation: about 12 hours with maximum voltage
  • Power: 6 w
  • Equipped with LED voltage display
  • With a lithium battery
  • Resolution : 0.1 kv
  • Charging time: 4.5 hours
  • 12 V 4400 mAh battery
  • It has an alarm and a headphone light
  • shutdown both automatically and manually
  • Probe wire size : about 1.5 meters
  • With warranty and after-sales service
Read moreShow less
Description

Introducing the Holliday Test Device:

  • The devices of this company are in three models of 20kv, 25kv, 30kv.
  • The voltage variations of the pipe hollow test tube are ramp and continuous and can be adjusted to any desired voltage.
  • The tube halli tube testing machine has an online output-connected digital voltmeter that samples the outputs several times per second.
  • Measures the output voltage and shows in the indicator.

Technical Information of Holliday Testing Machine:

  • Nutrition The halide test is provided by a 6-volt battery with a capacity of 5 amps rechargeable.
  • This battery is embedded in the user's grasp. So that the user is able to make necessary changes or reviews when necessary.
  • The tube insulator is equipped with a battery charger and supplied by the standard power cable supplied with the device.
  • The device is equipped with LED charging indicator, which enables the user to continuously determine the battery performance for power and device setup.
  • The need to work with a high voltage device is an insulating body. For the strength of the case, the device is made of Italian fiber.
  • Additionally, the complete insulation of the device has a higher strength compared to plastic boxes.

How to operate the plumbing test machine:

  • The device has a self-test at start of work, which, once it is switched on, beats the test beep, and then the beep is cut off. Which indicates the device is ready for work.
  • If the device does not hang up or beep, or if the lamp is connected to the charger and the battery is empty, it means that the device is not ready for testing.
  • The device has a portable bag, which, in addition to the ease of movement, can be used to shake the device and cause no damage to the device.
  • A probe number is provided for the displacement of the spring on the pipe and, if necessary, a series of vacuum probe is provided and delivered.
  • The device has a ground wire number and one power cord to charge the device.
  • The operation of the machine is very simple. On the 2-volt plate, 4 LEDs and 2 switches are installed.
  • A larger switch to turn on and off the device.

:How to work with the Holliday Test Device

  • First and foremost, when the device is off, the volume of the device is minimized.
  • Connect the ground wire to the device and connect it to the body of the pipe or metal body.
  • It is true that it is also connected to the ground at the same time
  • Then connect the voltage probe of the device.
  • If the wire is not connected to the ground for any reason, the device will not work properly.
  • In case of testing on the pipe, we first install the spring on the pipe.
  • Then turn on the device and set the required voltage according to the supplied SPEC. Then, place the cord on the spring and slip it down.
  • In the event of failure, insulation is detected by creating a spark (SPARK) and a fa-+
  • Sometimes it's seen that users instead of direct-connecting the earth wire to the work surface (pipe) attach it to the damp cloth on the ground.
  • And also connect the pipe body somewhere to the ground. And use the ground as a conductor.

Additional information about metal pipe equipment:

  • The steel factory has a steel pipe clamp and a metal pipe clamp.
  • The bending tube is used for steel pipes, steel pipes, stainless steel pipes, welded pipes and circular steel pipes.
  • Hydraulic bender with bending ability of metal pipes from 1/2 to 2 inches in size manually at various angles up to 90 degrees.
  • The Holliday Rustgar test has the ability to insulate pipes and metal fittings.
  • The metal strip strip is capable of pulling insulating tubes from 2 to 56 inches.
  • Re-checking cameras have access to piping systems, problems in the cavity wall, problems in water tanks, ducts and air conditioning systems.

Read more about other products of the industry:

  • For cutting of all kinds of plastic or polypropylene tubes, shear shear shears or shear shears are used.
  • pex pipe fittings are pressed by a pex pipe press (including pex manual pipe press, a pex, pex pipe press, and a hydraulic press of a pex pipe).
  • It is worth noting that in new years, metal pipes, galvanized, have been used, which are made by hand tools or electrical workpieces.
  • It should be noted that in the main networks of pipelines, pex pipes are used. To open these types of pipes, you can use the roller of the pex industrial pipe.
  • It is worth noting that the five-layer pipes bend with a five-layer tube bending machine and riveted with a pex pipe piercing device.
  • To test the pipe after the completion of the plumbing. When the pipes are filled with water, after testing the pipes and closing the openings, the pipes are tested by plumbing testing machines, which include (manual pump test and electric pump test).
  • To leak the pressure pipes, we introduce the industry-leading mini-leak detector. The industry has gas leak detectors.
  • For repairs of polyethylene welding machines, polyethylene boiling heat, green tube iron, pump testing machine,pex pipe presses, welding inverters and leak detectors, please refer to the sales office of the industry.
  • Stainless steel extruder is also used to repair pipe and fittings of pe.
  • The high-pressure welding extruder of the industry is used as a welding pipe and polyethylene fittings.
  • Due to the fact that steel and galvanized pipes are used today, electric devices are used to carry out these types of pipes.
  • The industrial scrubber is used to peel polyethylene pipes.
  • The squzeer is used to block the transmission of pe pipes
  • Cutting of pe pipes from a size of 25-160 mm is done by pipe on guillotine.
  • Multi-clamp is also used to hold polyethylene pipes during welding.
  • The clamping of polyethylene pipes is used to hold the polyethylene pipes at the welding time.
  • Welding Industry has the ability to weld various types of plastic surfaces in PVC, PP, polyethylene.
  • The Rossabor copper tube has the ability to cut all kinds of copper and aluminum pipes. And Ripper is a steel wire mesh made of high alloy steel
  • Hydraulic bender The five-layer industrial pipe is used to bend all kinds of steel, steel, copper and aluminum pipes.
  • Hydraulic polisher is used to get all kinds of industrial money.
  • The hand pump is used for winding up to a maximum of 1.9 times

Information:

RSCo Holiday tester:

  • RSCo Haliday tester is able to test pipes dielectric and metal connections.
  • Its voltage can be set to 100 V.
  • It has standard and telescope handle.
  • It has warning light and ring n its handles.
  • Contact us for more information.

Holliday Test Device

Information:

  • It has two models of  20 and 30 Kw.
  • it has three special handles to move in pipe.
  • It has a high quality.
  • Contact us for more information.

Read moreShow less
Product Details

Data sheet

Name
RSCo Holiday tester
Model
HD-105A
Power
6 w
Input voltage
AC 100-240V
After-sale services
available
Function system
manual
Output voltage
12.6 volts 1 amp
Accuracy
±(0.1KV+3%)
Warranty
available
Calibration sheet
available
Quality rating by Rastegar Sanat from 0 to 100
70
Shipping Box
available
Thickness
0.1 to 35 mm
Dimensions
240x165x85 mm
Battery capacity
12 V 4400 mAh battery
Charging time
4.5 hours
Reviews (0)

No customer reviews for the moment.

You may also like
$801.00

Information :

Inspection camera :

  • Ability to inspect in piping system, problem with Cavity wall ,problem in water tanks and Air Conditioning System, underground canal(channel) and pipe lines
  • Full automatic
  • Material of body: alloy of aluminum
  • Progress control box
  • Ability to record video and photo
  • With memory card
  • High quality made
  • Colored screen for dark tunnel
  • Contact us for more information.
$170.10

Information:

RSCo Manual Tape Wrapping Machine:

  • Able to rotate insulating tapes from size: 4 -56".
  • Includes teflon rollers for more convenience
  • Adjustable rollers in different sizes.
  • Includes spring between 2 aluminum plates.
  • Able to use tapes with different widths.
  • Includes ISO9001 and CE from Europe union.
  • Made of aluminum.

 

$263.70

Information:

RSCo Holiday tester:

  • RSCo Haliday tester is abale to test pipes dielectric and metal connections.
  • 10 to 30 kw out put power.
  • 12 V input voltage.
  • Chargable device .
  • Equipped with plier and input cable .
  • Calibration certification.

$558.00

Information:

RSCO Hydraulic pipe bender

  • Ability to bending metal tube(steel, Galvanized)from(1/2 to 3inch)in form of hydraulic manual in several angle
  • Steel stands for standing and easy work
  • Working range : 1/2-3 inches .
  • Made of steel ans ductile iron .
  • 90 degree Hydraulic pipe bender .
  • Jack power pressure : 20 Tons .
  • High power jaw in single size
  • Resistant plastic box
  • Ability to regulation and change hub for change in bend angle
  • ISO 9001 & CE
  • Weight : 100.5 kg .
  • Contact us for more information .
$513.00

Information:

RSCO Hydraulic pipe bender

  • Ability to bending metal tube(steel, Galvanized)from(1/2 to 3 inch)in form of hydraulic manual in several angle
  • Steel stands for standing and easy work
  • Made from aluminum (7000)
  • High power jaw in single size
  • Resistant plastic box
  • Equipped to wheels
  • ISO 9001 & CE
  • Contact us for more information .

 

$243.00

Information:

RSCO manual tube bender

  • Bend the metal pipe, steel pipe, stainless steel pipe, wire pipe, circle steel pipe.
  • Maximum rotation of bend: (180 degree).
  • Bend the pipe without any damage.
  • Material: steel.
  • Maximum pressure:1000 kg .
  • Jaw : 10 , 12 , 14 , 16 , 19 , 22 , 25 mm
  • Weight: (25kg).
  • Resistant plastic box.
  • Function: very fast.
  • Contact us for more information.

Menu

منو سایت