Hacksaw Blade
Information:
For cutting all kinds of metals, aluminum, iron
Suitable for cutting wood and plastic
Max cutting size: 250 mm
Total length: 305 mm
Sharp teeth
The surface is evenly hardened
Made of HCS...
Protractor
Information:
A digital inclinometer is used to measure the angle of a slope, height or height of an object with high accuracy.
Measuring range: -30 to +30 degrees
Resolution: 0.01 degrees
Accuracy in the...
Industrial square
Information:
Industrial ruler is used for measuring and inserting angles as well as controlling angles.
Angle: 90 degrees
Size: 200 * 130 mm
Internal angle accuracy: 3.7 micrometers
Outer angle...
Digital Based caliper
Information:
The caliper is used to measure the exact height of industrial parts with high precision.
Digital operation system
Measurable size: 0-300 mm
Error: +/-0.03 mm
Resolution: 0.01 mm...
4-Unit Battery Charger
Information :
This battery charger is designed for charging vehicle batteries with advanced functionality and robust performance.
Key Features:
Charging Voltage Range: 12-24V
Capable of...
Trolley Floor Jack
Information :
Trolley Floor Jack is suitable for lifting up cars
Capacity 10 ton
closed Height 160 mm
open height 560 mm
Has wheels for easy transportation
Suitable for lifting passenger and...
Rechargeable drill
Information :
Different kinds of drill bit to pierce wood, fiber glass , metal and plastic .
Speed in Free mood : 0-400, 0-1350 rpm
Gearbox with 2 speed to increase efficiency
Input voltage :...
Pressure Sprayer
Information:
Used for greenhouse and garden spraying and pest control
Suitable for mosquito spraying, aphid removal, large places and etc.
Spraying is in powder form
Strap for easier carrying of the...
Hammer Drill
Information :
We use Rotary Hammer Drill to destroy tough walls
can be used in 3 modes; Drilling, impact drilling and destruction
Spherical cable protector for longer life and greater maneuverability...
Steel Welding Wire
Information:
Used for uniform welding
Suitable for welding low carbon stainless steels Cr-12% Ni 2% Mo p 18% and steel welds
Used in combination with argon gas
Tungsten electrode arc welding...
Orbital jigsaw
Information :
Orbital jigsaw is a practical tool which is used to cut metal and wood in curve and straight type.
Speed without load : 1000 - 3100 round per minute.
Power : 750 w
Cutting capacity : Wood...
Miter saw
Information :
Miter saw is suitable for carpentry to cut wood .
Speed : 3000 - 3600 round per minute
Power : 1600 W
Diameter of blade : 254 mm
Diameter of shaft : 25.4 or 30 mm
It has low sound cause of...
Pressure Washer
Information :
pressure washer used for cleaning house or garage and the other places
Power : 2700 w
Water power : 195 bar
Max input water pressure : 4 bar
Min output water pressure : 4 bar
Max output...
Electric soldering gun
Information :
We use Electric soldering gun to melt solder and connect metal part .
Electric soldering gun is used for powerful and high speed .
Needed time to warm up : 3 _ 5 min
Power : 40 w...
Digital Clamp Amperemeter
Information:
The amperemeter can measure direct current, alternating current, direct voltage and alternating voltage.
Maximum measurement range : 600 amps
AC voltage measurement range:...
Crowbar
Information:
Used to pull out long nails and to open pallets and wooden boxes
Made of chrome vanadium steel
Forged ends for more resistance
One chisel edge
Unique and ergonomic design
Impact and pressure...
pressure gauge
Information:
A hand gauge is used to measure the amount of pressure on the surface compared to the cross section.
Bottom connection type / connection from below
Plate diameter: 6 cm
Measurable...
Gasoline Generator
Information :
Gasoline Generator is used to provide electricity
Power: 3200 w
It has a motor with inverter technology
Equipped with a four-stroke engine
The amount of sound produced : 62 db
output...
Concrete glue
Information:
Concrete glue is used to increase the adhesion of new concrete to old concrete in repair projects
Suitable for planting all kinds of rebar and reinforcement in concrete
It can be used in...
