Manifold gauges
Information :
Manifold gauges is suitable for charging gas , making pressure , vacuum and destroying wet .
Equipped with anti-strike to avoid strike and pressure .
Suitable for calculating pressure...
Tool Set
Informaton :
This perfect tool set is suitable for repair , electric operation .
Material : Chromium Vanadium .
Tool set standard : metric .
21 pcs Box end wrench :...
Gasoline Tree Saw
Information:
Used for cutting trees, pruning trees or preparing firewood
Power supply: gasoline
Power: 1.5 kW / 2 horsepower
Maximum speed: 11,000 rpm
Ideal speed: 3,300 ± 400
Oil capacity: 240 ml...
Cordless Threading Machine
Information:
cable threading machine is used for pulling cables and wires
Battery capacity: 10000 mAh
Speed: 40 meters per minute
With the ability of 6 to 8 hours of nonstop work...
Circular saw
Information :
Circular saw is a very practical tool in carpentry and can cut length and width and to make curve.
Speed without load : 4800 round per minute.
Power : 1800 w
Input Voltage : 220 V...
Thread taps handle
Information:
This Thread taps handle is made of steel
With ergonomic design to avoid tring the operator.
Opening and closing is so easy .
Made in China.
Made with high quality and resistant .
This...
Threading tool machine
Information :
Light device which can be so precisely controlled .
Unique design and can control the power in low speed .
Equipped with electronic over load control which can be stopped at the...
Drill bit lid
Information :
This drill bit hat works with high precision .
This Chuck follower is a connector between the milling tools and turning chuck.
Suitable for rechargeable screw driver , drill and drill bit...
Chuck conversion
Information :
We use Chuck conversion in electric screw driver .
With hexagon conversion .
Chuck conversion size : 6,5 mm.
Working system : manual.
Made in Taiwan.
Contact us for more information.
Dead Center Miling
Information :
Center Morse tool
We use Center Morse tool in milling to mark the point we want to drill.
Made of HSS steel
Made with high quality and resistant
Made3 with different diameters and...
Form cutter milling
Information:
This Form cutter milling is made of diamond
Made with high resistant .
We use this Form cutter milling for expensive stones .
Pressure and strike resistant .
Made with high quality...
RSCO Air Compressor
Information :
To supply the compressed air required by pneumatic tools
Power: 550W/0.75 hp
Working voltage: 220 V
Frequency: 50 Hz
Maximum pressure : 8 bar
Steel body
Dimension : 41x41x61
Tank...
RSCO Allen Wrench
Information:
It is an L-shaped hexagonal device used to loosen and tighten Allen screws
Ideal for confined and inaccessible spaces
Size: 3.5 mm
Made of high strength Steel
Combination of steel...
Air Hose Reel
Information:
To roll hoses by high power
Length: 35+2 meters
With automatic rotation of 180 degrees
With the ability to connect to the wall
Equipped with a hose lock
Working pressure: 150 PSI
Hose size:...
Iron file
Information :
A file is used to soften, sharpen, smooth and clean the surfaces of almost all materials.
Section type: flat
Degree of wear: medium
File length: 150 mm
Handle size: 80 mm
Section size: 16*4...
Threading tool machine
Information :
rated power 1200w
supply voltage 220v
the spindle rated speed 156 r/min
tapping capacity for steel M6-M33
tapping capacity for Aluminum M6-M36
tapping capacity for Stainless steel...
INSIZE Feeler Gauge 32 blades
Information:
We use Filler gauge measure to measure and control dimensions.
In three models, 17, 20 and 32 blades
Made of stainless steel.
Working system : manual
Size on each blade in...
