Dispatcher::createUrl() miss required parameter "id_search" for route "module-pm_advancedsearch4-searchresults"Dispatcher::createUrl() miss required parameter "id_search" for route "module-pm_advancedsearch4-searchresults"
Rastegar Industrial Tools
Vacuum Pump
Information:
We use this pump to make void in specific system.
Voltage :220 V.
Frequency : 50 - 60 HZ.
Flow rate on frequency 50 : 42 liter/min
Flow rate on frequency 60 : 50liter / min
Partial pressure :...
Wedge Welding Machine
Information:
For welding all kinds of plastic surfaces in grades of PVC, PP, PE, etc.
Power: 2300 w
Source power: electricity
Voltage: 230 v
Digital display
Maximum working pressure: 100 - 1000...
Vulcanizing Machine
Information :
We use Vulcanizing Machine to repair tilted tires and tubes .
Working Voltage : 220 V .
Able to work with different kinds of tubes .
Equipped with powerful pneumatic jack .
Working...
Rsco Electric Drill
Information :
This Impact drill has different kinds of drill bits , pierce wood , fiber glass , metal and plastic .
Equipped to left/right sided system
Chuck type : wrench shape
Ability to control...
Automotive parts washer machines
Information :
We use Automotive parts washer machines to wash different kinds of cars .
Two kinds of tanks .
Equipped with wheels to for an easy transportation .
Working pressure :...
Core Drill
Information :
We use core drill to make holes in special materials to take samples .
Ability to connect to water for easy cutting
Thickness of drill bit: 102 mm
Powerful gearbox with two gear
Voltage :...
Circular saw
Information :
Circular saw is a very practical tool in carpentry and can cut length and width and to make curve.
Speed without load : 6000 round per minute.
Power : 1350 w
Input Voltage : 220 V...
Electric sheet cutter
Information :
Electric sheet cutter is a strong tool which is used to cut plastic , metal , steel ... sheets.
Speed without load : 1600 round per minute.
Power : 620 W
Dimension : 8.5 × 20.4 ×...
Electric soldering
Information :
We use Electric soldering gun to melt solder and connect metal part .
Electric soldering gun is used for powerful and high speed .
The body made of metal
Power : 40 w
Ergonomic and...
Electric Tile Saw
Information :
We use electric tile cutter to cut ceramic , tie , concrete , ...
Blade material : Tungsten carbide
Power : 900 w
Working voltage : 220 V
Max cutting depth : 40 mm in angle : 90 , 30...
Electric Rebar cutter
information :
Electric Rebar cutter Cutting size: 4-20 mm
voltage 220 volts
Power: 900 / 830 watts
portable
Ability to install on the table
Blade made of steel
Cutting speed 3 to 3.5 seconds...
RSCO Electric Paint Spray
Information :
Electric paint spray is a new technology to pain different surface.
Power : 500 W
Without need to compressor
Working Voltage : 220 V
Equipped to aluminum spray gun
Ergonomic...
Magnetic drill
Information :
Magnetic drill is able to pierce in high speed , hard and precise operation .
Engine with inner wiring
Speed in free mode : 700 rpm
Cooling system
Magnetic stickiness : 12250 N
Power :...
RSCO Bench Grinder
Information :
Desk grinder is practical tool which is used for cutting stone , plastic , tile , metal . etc ...
Wheel size : 10000 rpm
Power : 150 w
Voltage : 100 - 120 v , 220 - 240 v
Equipped to...
RAIDER Angle Grinder
Information :
We use Angle Grinder to cut stone , tile , plastic , metal , ....
Anti slip and Anti-sweat plastic cover handles.
Speed : 6500 rpm
Power : 2350 w
Input Voltage : 220 - 240 V
Disc...
Threading tool machine
Information :
power 600 w
Working voltage 220 V
size of work : M3 - M16
speed 312 rounds per minute
Working range: horizontal 1100 and vertical 400 mm (adjustable)
Device model : M16
made in...
RSCO Power supply
Information:
Suitable for charging devices that need repair
Equipped with an LED screen with the ability to work in low light
Input voltage: 110/120 volts
Output voltage: 0 to 30 volts
Output...
Hydraulic Rescue Spreader (Jaws of Life)
Specifications:
Weight: 20.64 kg
Pulling force: 48 kN
Country of origin: China
Working pressure: 720 bar
Maximum cutting force: 380 kN
Maximum pulling force: 57.07 kN...
