Out-of-Stock
RSCO Bearing Puller
Information:
It has a full steel body
It has two half-moon steel parts
External and internal use
Shaft material: steel alloy
Capability: 23 - 130 mm
Working depth: 140 mm
Resistant to light...
Puller and Bearing Separator
Out-of-Stock
RSCO Two leg Puller set
Information:
It can take all kinds of bearings and pulleys in different sizes from inside and pull it out
Suitable for removing all kinds of gears, bearings, grease retainers, etc.
Can be used...
Out-of-Stock
FORZA Two Leg Puller
Information:
The body is made of forged steel alloy
It can be used for pulleys that needs to be removed by pulley nails outside the pulley.
Minimum workable size : 25 mm
Maximum applicable size :...
Out-of-Stock
FORZA Two Leg Puller
Information:
The body is made of forged steel alloy
It can be used for pulleys that needs to be removed by pulley nails outside the pulley.
Minimum workable size : 25 mm
Maximum applicable size :...
Out-of-Stock
FORZA Two Leg Puller
Information:
The body is made of forged steel alloy
It can be used for pulleys that needs to be removed by pulley nails outside the pulley.
Minimum workable size : 60 mm
Maximum applicable size :...
Out-of-Stock
FORZA Three Leg Puller
Information:
The body is made of forged steel alloy
The tip of the shaft can be rotated 60 degrees
Due to narrow edges suitable for tight spaces
Arm length: 200 mm
Capability: 210 mm
The length...
Out-of-Stock
FORZA Three Leg Puller
Information:
Made of forged alloy steel
120 degrees
It can also be used as two legs with an angle of 180 degrees
Four holes on the arms to adjust the Puller
Puller nails have a middle slot to...
Out-of-Stock
FORZA Three Leg Puller
Information:
Made of forged alloy steel
120 degrees
It can also be used as two legs with an angle of 180 degrees
Four holes on the arms to adjust the Puller
Puller nails have a middle slot to...
Out-of-Stock
FORZA Three Leg Puller
Information:
Made of forged alloy steel
120 degrees
It can also be used as two legs with an angle of 180 degrees
Four holes on the arms to adjust the Puller
Puller nails have a middle slot to...
Out-of-Stock
FORZA Two Leg Puller
Information:
The body is made of forged steel alloy
workable size : 350 mm
Arm length: 200 mm
The length of the cross : 425 mm
As a slider
Weight: 9 kg
Made in Spain
Contact us for more information
Out-of-Stock
FORZA Two Leg Puller
Information:
The body is made of forged steel alloy
workable size : 240 mm
Arm length: 205 mm
The length of the cross : 325 mm
As a slider
Weight: 7.74 kg
Made in Spain
Contact us for more...
Out-of-Stock
GROZ Three Leg Puller
Information:
Used to remove and place all kinds of industrial pulleys
The center screw is made of steel
Length: 8 inch
Reversible claw legs
The wrench section is on the central nut to prevent...
Out-of-Stock
FORZA Two leg Puller set
Information:
The body is made of forged steel alloy
For more information, see the description section
It has 5 pulleys in 2410, 2415, 2420, 2425, 2430 models.
size : 95 to 240 mm
Has a stand...
Out-of-Stock
FORCE Three Leg Puller
Information:
Used to remove and place all kinds of industrial pulleys
Sturdy design and iron body
Has adjustable prongs
Heated dies for high endurance
Size: 4 inch
Impact resistant
Made in...
Out-of-Stock
FORCE Two Leg Puller
Information:
Used to remove and place all kinds of industrial pulleys
Made of alloy steel
Has adjustable height
Size: 6 inch
Impact resistant
Made in Taiwan
Contact us for more information
Out-of-Stock
FORCE Two Leg Puller
Information:
Used to remove and place all kinds of industrial pulleys
Made of alloy steel
Has adjustable height
Size: 8 inch
Impact resistant
Made in Taiwan
Contact us for more information
Out-of-Stock
mini three Leg Puller
Information:
Used to remove and place all kinds of industrial pulleys
Made of hardened iron
Workable diameter: 40 mm
Weight: 200 g
Has heat treated dies for high endurance
Impact resistant
Made...
Out-of-Stock
TOPTUL Bearing Separator Set
Information:
Used to hold the pieces
Made of ductile iron
One flat side and one plate shape side
Two side screws for mounting on the piece
Size: 30 - 50 / 50 - 75 mm
Sloping double-sided...
Out-of-Stock
SONIC Three Leg Puller
Information:
Used to remove and place all kinds of industrial pulleys
Can be used as two leg and three leg
arm length: 90 mm
Adjustable height
Material: steel alloy
size: 3 inch
Workable...
Out-of-Stock
FORCE Three Leg Puller
Information:
Used to remove and place all kinds of industrial pulleys
Sturdy design and steel body
Heated dies for high endurance
Size: 8 inch
Impact resistant
Made in Taiwan
Contact us for...
Showing 41-60 of 79 item(s)
What is a puller ?
It is an essential tool for maintenance in industry .
Puller Types :
External Puller
Hydraulic bearing Puller
Steering puller
Reversable puller
2 Jaw gear puller
Gear Puller
Internal Puller
Bearing Puller set
Jaw Gear Puller
Hydraulic Puller
Tie Rod Puller
What type of tool is a puller ?
They are used to remove gears , bearing pulleys and other components .
What is Bearing Separator used for ?
It is an alternative to an external bearing puller .
Best Bearing Separator
Best Bearing Separator is available on rastegarsanat website .
Buy Bearing Separator
Buy Bearing Separator on rastegarsanat website with reasonable price .
English
فارسى
اللغة العربية