RSCo electrofusion welding machine
Information:
Able to weld all types of pipes and joints with the size of 16- 4000 mm
external memory
Output voltage: 4 - 48 V , 187 - 253 V
One-phase and three--phase
Frequency:...
RSCO plastic pipe cutter ROCUT
Information:
To hold, cut and chamfer all types of push-fit pipes and joints
Made of die-cast aluminum
Working size: 40 - 160 mm
Size of jaws : 40 , 50 , 75 , 110 , 125 , 160 mm
Locking...
Manual Screw-Type Pipe Stopper
Specifications:
Testable size: 110 mm
Made of flexible rubber
Operation system: manual
Testing is possible only through the inspection opening
Comes with an L-bar (L-shaped rod) to ease...
Pipe thread
Information:
To thread various types of galvanized pipes
Able to grab pipes in sizes: 1/2 - 2 inch
Steel jaws
two screwed handles
A metal Latch for changing to right and left directions
Durable plastic...
RSCO Welding Inverter Machine
Information:
To weld all types of iron, galvanized, steel, carbon steel, cast iron, etc. (acidic and alkaline environments)
Constant current output
Suitable size, lightweight, low power...
Pencil Tip Nozzle
Information:
Can be installed on a series of 1600 watt direct industrial heat guns
Ability to collect and target hot and cold air
Made of the best thermal alloys
Unique materials
Made in one piece...
RSCO copper Pipe Cutter
Information:
To cut all copper and aluminum pipes
Cutting size: 4-28 mm
Bearing rollers
Made with high quality
Made of alloyed-steel
Antiperspirant and anti-slip and made of plastic handle...
RSCo pipe vise
Information:
To hold all types of metallic pipes (steel, galvanized, etc.)
2 replaceable steel jaws
Made of the best alloyed steel
Size of the clamp: 4 inch
ISO9001 and CE standards
Contact us for more...
information :
Manual industrial hydraulic press
able to use 0.5-100 kg
3-28 cm diameter
2-20 cm inside diameter
0.5 mm finesse
manual industrial hydraulic press,hydraulic press,manual hydraulic press,hydraulic press...
RSCO Hydraulic pressing machine (30 tons)
Information:
We use this tool to press different industrial parts ( taking out parts or ball bearing) .
This pressing machine is made of thick sheets.
Jack is make of high...
Elbow Pipe Wrench
Information:
To hold, open, and close all types of steel, metallic, iron and galvanized pipes and joints
Forged and alloyed-steel body
Size: 3 inch
Overall length : 650 mm
Working rang : 10-105 mm...
Modular Crimping Tool
Information:
Used for pressing all kinds of wires and network cables
Ability to strip wires and install modular jacks
Dimensions: 170x65x25 mm
Length: 160 mm
Blade material: Steel Carbon...
Solder Sucker
Information:
Used to remove excess tin from electrical and electronic boards
Anti-corrosion plastic body for ease of operation
Manual operating system
Plastic head
Replaceable head
Ability to empty...
Dial caliper
Information:
A dial caliper is used to measure the diameter of the workpiece, the depth of the groove, the inner diameter of cylinders, bushings and the height of different parts.
Measurable size: 0-150...
Thickness gauge
Information:
The thickness gauge is used to measure the thickness of dimensions with high accuracy.
Measuring range: 0-10 mm
Accuracy: ±0.1 mm
Gradation in terms of 0.05 mm
Scratch and wear resistant...
Gauge block
Information:
The measuring block gauge is used in the periodic calibration and control of instruments such as micrometers, calipers, and measuring clocks.
Body made of steel
It has 8 block gauges with...
Digital Depth gauge
Information:
The depth gauge is used to measure all kinds of depth and precise and fine grooves with high accuracy.
Size: 0 to 150 mm
Accuracy: ±0.03 mm
Grading in terms of 0.01 mm
Has on / off...
Circumference tape
Information:
Circummeter is the measuring tape that is used to measure the inner diameter as well as the outer diameter.
Size: 20-300 mm
Measurement size of the environment: 60 to 950 mm
The unit...
Pneumatic Wrench Gun
Information:
To open and close a variety of high-strength bolts
Drive size: 1/2 inch
Torque range: 1626 NM
Hose size: 1/2 inch
Working pressure: 6.2 bar
Speed in idle mode: 6500 rpm
Workshop and...
Air Drill
Information:
To perform all kinds of high power drilling
Speed in idle mode: 1800 rpm
Chuck size: 10 mm
Exhaust on the back of the device to avoid disturbing the exhaust air for the user
Unique and...
